| Author | Message | ||
     Upthemaiden |
Clearing out some stuff. I don't know what all of these are worth, and there's too many parts to go digging around ebay to compare, but for the most part with the smaller stuff I'd at least like to just get enough after shipping to be worth taking the trip to the post office. I'll set prices to start, and if nobody wants them, feel free to make an offer. Combining shipping would obviously be idea with these kinds of parts. I'll take paypal, either friends/family, or you cover the fee. First part is a sidestand flipper, in reasonably good shape. Scuff mark on one side from when I unintentionally tested it. This was actually meant for a honda, it's not the oem Buell part, but I used it on my S1 for a while and it fits all the same. $10 shipped.  2nd part is the front pulley brace and cover. You can see some scuff/wear marks on the cover on the left side of the picture. The rest is just a little grease which I'll happily clean off before I ship, I just didn't notice until after I was taking pictures. $10 plus shipping.   Front pulley mount from an S2. In pretty good shape, but not perfect, and the chrome could use a good polish. Mean for a 16" shock and should fit any tuber. $30 shipped(it's heavy)  | ||
| Upthemaiden |
Left side engine brace with included tie bar. This is the one that connects the cylinders and holds the ignition and choke. From an S2 but should fit any tuber. $20 shipped.  Passenger peg bosses from an X1. $15 shipped.  Footpegs, fit any tuber. Big, heavy, probably comfortable but a little bulky for my tastes.... $15 shipped.  | ||
| Upthemaiden |
Gas tank retention plate, I'm sure it will cost more to ship this part than it's worth... $8 shipped...  M2 oil tank.... I *think* this will also fit an S3, but I can't confirm that. I did try to check these online, they seem to sell for $50-60 shipped on ebay, and current listings are all over the place. Say... $20 plus shipping  Front exhaust mount from an S2, will fit any tuber. Comes with the rubber bushing but as you can see the one side no longer has the lip on it. $30 shipped  | ||
| Upthemaiden |
These are injectors for an XB... $45 shipped  Rear exhaust mount. Apparently didn't line up perfectly and some knucklehead filed one of the holes... but these things are pretty stout so I don't think it'll really hirt anything. $15 shipped  Another front exhaust mount, this one from a 97 S1. Paint is shipping slightly from the front edge, but the bushing is intact. $25 shipped  | ||
| 1313 |
M2 oil tank will also fit S3. Same tank. | ||
| Upthemaiden |
Dianese Mig C2 gloves, size large. -Sold  (Message edited by upthemaiden on July 09, 2020) | ||
| Upthemaiden |
Gloves are sold, everything else still for sale. Open to offers on anything. | ||
| Mnscrounger |
interested in the footpeg bosses. Do you do Paypal, or do you want me to snail mail a old fashioned check? | ||
| Upthemaiden |
Hey Steve, I do have paypal, it's allroy_66@yahoo.com | ||
| Mnscrounger |
just sent payment minutes ago. Sorry for the delay, I so rarely use paypal I forgot my login. | ||
| Upthemaiden |
No problem! I got the payment. I'll get them all wrapped up and ready to go. If you can just send me a PM with your address. | ||
| Mnscrounger |
Oh yeah, that would help wouldn't it...  PM sent | ||
| Court |
>>>Gas tank retention plate, Ahhhh . . another great recall story. :-) | ||
| Lornce |
Sorry to be so obtuse, but will that oil tank fit a S1? I'll take it if anyone can confirm it'll fit an S1. Thanks! Lornce | ||
| Upthemaiden |
Hey Lornce, It definitely wont fit am S1. I think that's why I ended up grabbing it in the first place, but dont have a use for it. | ||
| Lornce |
10-4. Thanks for the intel.  | ||
| Gian4 |
I'll take the sidestand flipper if its still available. Gian4 | ||
| Upthemaiden |
It's all yours, I responded to your PM | ||
| Mnscrounger |
peg mounts received thank you. | ||
| Upthemaiden |
I forgot, I've also got the original swingarm from my S1 in a box in the garage. Nothing wrong with it, just replaced it with the aluminum X1 version. Includes the axle, adjusting blocks, mounting block, pivot, all of that, and has spools attached for a rear stand. Obviously it's heavy and in a big box, but I can get some pictures if anyone is interested. I'd be happy to make a very fair deal on it considering the potential shipping costs and the desire to get some space back in my garage. | ||
| Gian4 |
Josh Sent you email. Have you sent my part out yet? Thanks Gian4 | ||
| Load4 |
Are the foot pegs still available? | ||
| Upthemaiden |
The footpegs are indeed still available if you'd like them. | ||
| Redridergr |
Am I too late for foot pegs? Anyone else have a set? Thanks Tim | ||
| Upthemaiden |
the big rubber ones? I still have them. | ||
| Redridergr |
PM sent... I will take em! Thanks | ||
| Upthemaiden |
Footpegs sold |
