Author |
Message |
Rtlll
| Posted on Thursday, July 05, 2018 - 10:01 pm: |
|
Parting the 2003 XB9R shown in the photos. Bike runs and revs well, see Youtube video "https://youtu.be/WFwxzIRVPBQ". 27,736 miles, nice Pirelli Diablo Rosso on rear, front tire needs to be replaced. Pictures were taken today, ignore date in photos. Appears to have a custom muffler, possibly by Latus Motors. Bodywork, fairing mount, side scoops and pulley cover are sold. Have pretty much everything else. Have an open title for it. Front electricals initially dismantled by PO to look for shorts in wiring harness. Gauges and rear lights work, not sure about front. Please email rtlll@yahoo.com with any questions or items you're interested in. Thanks for looking, Rick
|
Rtlll
| Posted on Thursday, July 05, 2018 - 10:06 pm: |
|
Muffler says "Edelbrock RPM Series Tru-Flo" on bottom. |
Rtlll
| Posted on Thursday, July 05, 2018 - 10:07 pm: |
|
Please let me know what additional pictures you'd like to see posted as well. Thanks again, Rick |
Ghost69
| Posted on Friday, July 06, 2018 - 12:40 pm: |
|
How much for the grips? Could you also post a better pic of the muffler? Thanks, Wade |
Rtlll
| Posted on Saturday, July 14, 2018 - 01:31 pm: |
|
Sorry for the delay, pictures of the Muffler. Grips, how about $75 for the pair ? Seems like I've seen them go for higher than that but feel free to let me know if I'm out of line. Ignore 2004 date on pics, too lazy to reset camera. All pictures taken in the last month. Thanks, Rick rtlll@yahoo.com
|
Rtlll
| Posted on Saturday, July 14, 2018 - 01:33 pm: |
|
|
Rtlll
| Posted on Saturday, July 14, 2018 - 01:49 pm: |
|
Muffer has; Edelbrock RPM Series TRU-FLO Stamped in bottom |
Audiowize
| Posted on Wednesday, July 25, 2018 - 12:37 pm: |
|
Stuff I'm looking for: 1. Kickstand 2. <edited and removed this item> 3. Left and right handlebar controls and clutch perch. (I do not need your front master though) I wouldn't mind having both those levers and the lever mounting hardware as well. 4. The bottom plate of your airbox and the plastic tube that goes into the frame hole. 5. As many of the torx fairing screws as you will sell me! 6. Your shift linkage. 7. Your rear wheel. 8. Your rear pegs/brackets (I'm stuck with black ones on my silver bike!) 9. The metal plate under the outer timing cover, and the screws that go with it. 10. A full set of turn signals (I don't see them, but maybe you have them) 11. Your ECM (mine works, but has damaged connector tabs) I'm sure I'll run across more, but this is a good chunk of what's missing on my current project. (Message edited by audiowize on July 25, 2018) |
Audiowize
| Posted on Wednesday, July 25, 2018 - 12:45 pm: |
|
Add oil cooler scoop and left side air scoop (plus screws) if you have them. |
Rtlll
| Posted on Wednesday, July 25, 2018 - 05:27 pm: |
|
Audiowize and others, Thanks for your interest, but XB9R has been SOLD complete. I have some other XB parts let me see what I can get together from your list. Thanks again, Rick |
Skipbarberman
| Posted on Wednesday, August 29, 2018 - 11:03 pm: |
|
I have 3,4,6,7,8,10 and 11. 3. Switched to black perch, I'm fairly certain I have the original silver. 4. I have a complete airbox and the snorkel 6. I have all but the threaded rod....but when I went to woodcraft, I may have switched it all. 7. I have both front and rear silver cast 2003 wheels in VGC with new bearings and seals installed, less than 1k mi. 8. Replaced with Woodcraft, so I have all the cast pieces 10. I have a pair of turn signals, but not all 4 11. I have a race ECM for an XB9R Let me know if your interested in any of it. Also have complete 11mm final drive system from 2003 bike with newish belt, all in VGC. |
Mmcustoms
| Posted on Sunday, September 02, 2018 - 09:24 pm: |
|
Still got the shifter ?? |
Rtlll
| Posted on Monday, September 03, 2018 - 09:23 am: |
|
Good morning, sorry bike and all parts have been Sold. Thanks for checking older adds. Rick |
|