Author |
Message |
S2forever
| Posted on Wednesday, December 31, 2014 - 12:41 pm: |
|
Does it fit tuber? If not, which I guess so by its different look, why? |
Damnut
| Posted on Wednesday, December 31, 2014 - 02:04 pm: |
|
I believe so. It will be a 29 tooth compared to a 27 that is on the tuber. I just did that to my S3T, I think mine was from an 01 though. |
Totalnutah
| Posted on Friday, January 02, 2015 - 07:51 am: |
|
i used a rear sportster pulley on my x1 the centre hole needed enlarging by 3mm i think |
Johnod
| Posted on Sunday, January 04, 2015 - 08:21 pm: |
|
I've been looking at pics of those too, the bolt circle looks smaller to me, but I don't know. |
S2forever
| Posted on Tuesday, January 06, 2015 - 12:01 pm: |
|
Well, I am talking about secondary sprocket... I figure +04 sprocket won't fit tuber. Will add pic soon to clarify. |
S2forever
| Posted on Thursday, January 08, 2015 - 05:59 am: |
|
This is +04 sportster sprocket. Would not fit tuber.
|
Lakes
| Posted on Friday, January 09, 2015 - 04:40 pm: |
|
I don't know the answer but, i would first count the number of splines check offset check what side hole & splines. you can also get 28T |
|