Author |
Message |
Bikerrides
| Posted on Sunday, June 22, 2014 - 12:35 pm: |
|
Replacing in-line fuel filter on my 99 S3T and need to release the fuel pressure first. I have the service manual, but was wondering if anyone has a video on how to do it or where one may be posted online. Never done this before and wanted to see it done before I start on it. Probs stupid easy, but... Thanks! |
Jramsey
| Posted on Sunday, June 22, 2014 - 01:06 pm: |
|
The 90 degree fuel line fitting that comes out of the tank has a Schrader valve (used to check fuel pressure)in the end of it. Remove the cap and push the valve core with a wire,small rod to bleed pressure.Helps to have a rag to catch the gas. Here's a pic of the pump, the valve is under the cap.
(Message edited by Jramsey on June 22, 2014) |
Bikerrides
| Posted on Sunday, June 22, 2014 - 07:13 pm: |
|
Thanx James. How much fuel will come out? Enough to saturate a rag or just a small amount? |
Jramsey
| Posted on Sunday, June 22, 2014 - 07:51 pm: |
|
Shop rag will catch what comes out of the valve. I disconnect the the hose on the filters outlet side (front)then hold the filter over a pan until its drained then change it out. |
5liter
| Posted on Sunday, June 22, 2014 - 08:40 pm: |
|
You can also unplug the pump wire harness and start the bike and let it die. That's how I do it. You still get some fuel drip when you undo the fuel line from the filter. |
|