Author |
Message |
Dean
| Posted on Friday, May 10, 2013 - 11:31 pm: |
|
black block on my 08. finishing up some improvements & thinking of whittling down another block & returning my new race computer to its original location. dean |
Dean
| Posted on Friday, May 10, 2013 - 11:45 pm: |
|
another question - what height does it need to be reduced to? dean |
Bikelit
| Posted on Saturday, May 11, 2013 - 12:05 am: |
|
You asking about the block to protect the ECM? I raised mine 8mm four years ago and it ended any seat clearance problems. |
Dean
| Posted on Saturday, May 11, 2013 - 09:26 am: |
|
you just shimmed up the one? sounds interesting - i was thinking of adding another to the other side... dean |
Etennuly
| Posted on Saturday, May 11, 2013 - 10:21 am: |
|
I have one on each side on my '06. My second one came with the low seat I bought new shortly after I bought my Uly. Damn, that was seven years ago! I recall the part was in a little plastic bag, but don't remember seeing a PN. But I know they had them from the many threads here where people were ordering them a while back. I bet Froggy can find it! |
Dean
| Posted on Saturday, May 11, 2013 - 05:35 pm: |
|
did you have to file/grind down the second block for the seat to fit? dean |
Etennuly
| Posted on Saturday, May 11, 2013 - 05:41 pm: |
|
I did not cut mine down at all. When I first put in in there I could actually feel it with the low seat on. After a while I either got used to it or it lowered it self. |
Gamdh
| Posted on Saturday, May 11, 2013 - 08:22 pm: |
|
Ordered this a long time ago for the '06 1. Travel Limiter, N0903.1AK 2. Socket head cap screw, AA0410.2CZB |
Orangeulius
| Posted on Sunday, May 12, 2013 - 11:59 am: |
|
Dean, I've got an extra one. I'd be happy to send it to you no charge. I'm just south of Knoxville so you get it in a couple of days. PM me your info if you want it. |
Dean
| Posted on Sunday, May 12, 2013 - 01:32 pm: |
|
PM sent OJ! Thanks Dean |
Redtail
| Posted on Monday, May 13, 2013 - 01:34 pm: |
|
Hey Orangeulius Can you post a photo of the part and after install also size of part please. I have relocated and did not like the way wires were bent. My seat sits on the plugs and I have a damaged ecm. Thanks. |
Dean
| Posted on Tuesday, May 14, 2013 - 11:48 am: |
|
Redtail - wanna try my stock ECM ? I siliconed the plug area as a precaution, but it's done well for me for 12k miles... Dean 615 545 1111 texts ok Ps - u will really like a race ECM - much smoother operation! |
Orangeulius
| Posted on Tuesday, May 14, 2013 - 10:01 pm: |
|
Redtail, I shipped the part out Monday morning. Sorry I didn't see this. Maybe Dean can post a pic when he gets it. |
Dean
| Posted on Thursday, May 16, 2013 - 11:56 am: |
|
i get 28.36 mm or 1.116 inches tall for the block - stock, not trimmed... dean |
Dean
| Posted on Saturday, May 18, 2013 - 08:43 pm: |
|
i trimmed the back block down to 21mm. 22mm might work. i can get the seat on. taking it all of the bottom leaves the bolt no seat ...i would try about half from the top & bottom. ill have a 21 mm block fabbed from aluminum... dean |