G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Chauly Posted on Thursday, June 28, 2012 - 06:01 pm:        ... on my '97 S-3. Why else would it squeak at idle? Upon closer examination, the Z-bracket is cracked, again! A. Does anyone have a source for this (no-part-number) piece, or an extra to part with? B. When I looked at the Mounting update Bulletin again, it says "not for pre-'99 S-3's". If not that, how does it hang? My Z-bracket fit, and worked for a while. C. What's the part number for the rubber inserts in the holes cast into the underside of the engine?   Jramsey Posted on Thursday, June 28, 2012 - 06:08 pm:        65882-96Y muffler bushing 65505-98Y Z bracket   Natexlh1000 Posted on Thursday, June 28, 2012 - 06:20 pm:        Weird! My Z-bracket is the ONLY part of my X1 not to fail.   Buellistic Posted on Thursday, June 28, 2012 - 10:50 pm:        These SERVICE BUELLetins are not written by RETRO FIT KNOWAGEABLE OLD SCHOOL PARTS MEN !!! The upside down "Y" BRACKET fits my 1997 S3T ??? It said(SERVICE BUELLiten) the same thing on the BUELL FAN KIT, "BUT" it fits my BUELL ...   Chauly Posted on Friday, June 29, 2012 - 06:42 am:        LaFayette, My point exactly. The Y-Bracket and Z fit perfectly, and have done well, much better than the original. I had a really good welder reinforce the collector wye, eliminating the tab, so it looks clean. James, thanks for the numbers. Now I'll see if they work!

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: