Author |
Message |
Suamico_sd
| Posted on Tuesday, June 26, 2012 - 09:35 pm: |
|
Im new to Buells (98 S3) and need fork seals ASAP! I will also need to fix things as i dig into it. Who is good? |
Jramsey
| Posted on Tuesday, June 26, 2012 - 09:39 pm: |
|
American Sport Bike |
Suamico_sd
| Posted on Tuesday, June 26, 2012 - 09:57 pm: |
|
Thanks, got the seals ordered! |
Gixxer86g
| Posted on Wednesday, June 27, 2012 - 07:10 am: |
|
Did you try Seal Mate first? It fixed my leaky seal. |
Buellistic
| Posted on Wednesday, June 27, 2012 - 10:54 am: |
|
Try some DOT3 brake fluid as may stop it from leaking ... |
Dannybuell
| Posted on Wednesday, June 27, 2012 - 11:11 am: |
|
seal mate and brake fluid does nothing for the sludge in the forks. |
Imaposer2
| Posted on Wednesday, June 27, 2012 - 01:14 pm: |
|
No, but servicing forks and changing out the oil doesn't require new seals either. Have you tried the film trick? |
Oldog
| Posted on Wednesday, June 27, 2012 - 01:37 pm: |
|
Have you tried the film trick? Please explain the trick} |
Dannybuell
| Posted on Wednesday, June 27, 2012 - 02:18 pm: |
|
one of those while you are there opportunities, like timing belts and water pumps. |
Imaposer2
| Posted on Wednesday, June 27, 2012 - 03:08 pm: |
|
Oldog, The film trick: Pretty simple really. Often, a little dirt and debris can work its way in between the seal and the fork tube, causing an otherwise perfectly good seal to leak. The "trick" involves taking a piece of "film", curving it around the tube and carefully working it under the seal to clean out the space between the two. I say "film" because a common thing used back in the day was a piece of old 35mm film negative that you got when you had your pictures developed. So, for you old guys that know what the hell I'm talking about, just find something of similar thickness. For you young guys that don't know what 35mm film even is, just ask your parents where they keep all their old family photos... Just cleaning the spooge out will often allow a "leaking" seal to start sealing again. Dannybuell, I suppose you could look at it that way. But, personally I find completely disassembling the front end of the bike and then the forks for new seals just because you want to change out the oil to be a bit overkill. Most modern forks really should be serviced on a semi-regular basis, especially cartridge forks, but IMO the seals only need to be replaced if they leak. I have bikes from the 70', and 80's in my garage that still have their original seals. YMMV of course. |
Suamico_sd
| Posted on Friday, June 29, 2012 - 01:27 pm: |
|
I tried the film trick. These seals are toast. I don't mind fixing it right the first time. I just love this ride. My first Buell and just can't get over how "real" it feels. I want to kick my self in the %^& for not buying one sooner. |
|