G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » Old School Buell » Archive through February 26, 2011 » Head bolt kinda fixed... « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Serialk
Posted on Friday, February 11, 2011 - 07:40 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I bought my bike like this. I don't know if its JB weld or some other epoxy but I would prefer it if it was welded. I want to upgrade to the billet hanger and new bolts.
could a welder do a bead around the epoxy?
or would it have to come off,back on and tapped?
I know there are others that have been through this. I don't know how mine was repaired and don't really trust it.
What would you do?



Top of pagePrevious messageNext messageBottom of page Link to this message

Foximus
Posted on Friday, February 11, 2011 - 07:47 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

ouch.... I'd use the excuse as an opportunity to upgrade heads.


But thats just me.
Top of pagePrevious messageNext messageBottom of page Link to this message

Langperf
Posted on Saturday, February 12, 2011 - 02:24 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Yes it can be welded
Yes all the epoxy and paint would have to be removed before it is welded
Yes it would most likely have to be re-tapped
Yes the head would have to be off the bike
Yes the head would have to be jigged up in a mill and both mounting faces machined parallel to each other again

so unless you have the knowledge and equipment to do this yourself it will almost always be more cost effective to replace the head with a good new or used unit
Top of pagePrevious messageNext messageBottom of page Link to this message

Serialk
Posted on Saturday, February 12, 2011 - 02:16 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I have ridden the bike like this for 6,000km so far. so it cant be that shotty of a repair job...
Well to find 1 front thunderstorm head is pretty hard. Heads are usually sold in pairs as we all know. There is a set on ebay right now from st pauls hd for $650.

Or xb heads from NRHS for $850...

Yes I am capable of taking my heads off
Yes I can take this to a machinist that knows what he is doing.
Yes I can pay less then the cost of new heads... I hope...

Or Does anyone have a front thunderstorm head without a broken mount they want to trade?? hahaha you never know!

income tax season is upon us. The next few weeks will decide the route I take...
Top of pagePrevious messageNext messageBottom of page Link to this message

Foximus
Posted on Saturday, February 12, 2011 - 02:28 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Those heads have been on ebay for $650 for over 3 months now, so dont consider them the pricing benchmark.

Welding cast aluminum for a long term stress bearing structure (especially where major vibration and stress fatigue becomes an issue) always is tricky. Not a bad option, you might get charged $100 or so. So really you have nothing to lose.


However, that being said. I picked up my brand new in the packaging 2007 screaming eagle heads for $250 on ebay. So its really just about waiting for that opportunity.
Top of pagePrevious messageNext messageBottom of page Link to this message

Serialk
Posted on Saturday, February 12, 2011 - 02:46 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Thats a sweet deal! $250? Nice score Foximus!
Yeah Im keeping my eyes and ears open for the right opportunity.
I think I might wait until my shit list gets smaller. Take the head off and get it welded properly. nice thick bead,reinforce with a billet mount to make this baby bulletproof.

Or wait until someone says
" I got a front head for ya for a good price!"
Top of pagePrevious messageNext messageBottom of page Link to this message

Buellistic
Posted on Saturday, February 12, 2011 - 03:53 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Correct me if "i" am wrong, "BUT" the ports are the same in the THUNDERSTORM heads and the XB VALVES if installed allows the same flow ...
Top of pagePrevious messageNext messageBottom of page Link to this message

Foximus
Posted on Saturday, February 12, 2011 - 04:29 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

however you need to oversize your valve seats to make that worth it... as even in the xb heads the valve seats are too small for the valves.

Thunderstorm have more efficient combustion chamber.
Top of pagePrevious messageNext messageBottom of page Link to this message

Rick_a
Posted on Saturday, February 12, 2011 - 10:47 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

They probably used a longer bolt along with the epoxy. A good welder/machine shop could handle that without much fuss.

The XB heads have better ports and more fin area. If you get the 04+ XL versions they are already drilled for the carb mounts/breathers.

I sold my repaired Lightning heads for pretty good money and put that towards an XB top end.
Top of pagePrevious messageNext messageBottom of page Link to this message

Preybird1
Posted on Monday, February 14, 2011 - 10:54 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

"Thunderstorm have more efficient combustion chamber"

No they don't. That's why the the xb heads and the XL heads have the bath tube style combustion chamber. They are better and that is why HD used Buells design and called it there own. The XB and the XL head(s) can be used they are the same. I have a set on my bike right now. When i was building my motor, XB heads were on back order and were very hard to get. I had found a built(valves, springs locks) head on e-bay for $350 i traded it for a fully built XL head from Dan at NRHS because he needed it for a build he was doing and they were on back order. So he got an XB head and i got a $550 built head for $350.

The thunderstorm heads were better than the stock harley heads before the XL heads came out. That part is correct.
Top of pagePrevious messageNext messageBottom of page Link to this message

Foximus
Posted on Monday, February 14, 2011 - 11:06 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Well, let me say this then... The actual FUNCTIONING combustion chamber of the XB/04 heads might me more efficient, however the fact that it has no squish and is designed for a flat top piston is a major hinderence, and that is why a thunderstorm head will be more efficient. To make a XB head work the same you'll need to have the valves unshrouded, seats enlarged, and machined down with at least a 10* squish. A side advantage of that will be to run the piston cooler and have less det..
Top of pagePrevious messageNext messageBottom of page Link to this message

Kalali
Posted on Monday, February 14, 2011 - 05:47 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Why do you want to change it if it has been working well for so long?
Are you worried it might break and get you stranded? Just wondering.
Top of pagePrevious messageNext messageBottom of page Link to this message

Serialk
Posted on Tuesday, February 15, 2011 - 11:27 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I want to fix it because I want to put on my billet mount and want it to go on a head without any defects. I could put it on like this. But who knows how much longer this fix will hold. It's a gamble I don't want to take. Do it right the first time.
Top of pagePrevious messageNext messageBottom of page Link to this message

Xl1200r
Posted on Tuesday, February 15, 2011 - 11:47 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

replace the head with a good new or used unit

This would be my advice. It's typically the other side that breaks, so I'd be worried about this side stronger but not perfectly aligned and risking a break on the left side.

Thunderstorm have more efficient combustion chamber.

I'm not an engine building professional, but this is the first I've ever heard this claim. I've also heard that the Thunderstorm (maybe I'm thinking the Lightning heads - same as used on Sportster 1200S) are heavily shrouded and was the need for the second plug.

The general consensus I've heard is a stock XB head is typically better than a worked over anything else.
Top of pagePrevious messageNext messageBottom of page Link to this message

Serialk
Posted on Tuesday, February 15, 2011 - 04:48 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I would love to replace it with a good new or used. but i don't want to buy a pair... If I am going to buy matching heads then it will be a set of xb heads...
The roads are still covered in sand and de-icer where I am so I have some time to let this percolate.
Most likely I will take this head off and take it to a machine shop to get reinforced and aligned properly.

Here is some info on the heads FYI

http://xlforum.net/vbportal/forums/showthread.php? t=14000
Top of pagePrevious messageNext messageBottom of page Link to this message

5liter
Posted on Wednesday, February 16, 2011 - 09:42 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I had my head replaced last summer and only had to buy the front head.
Top of pagePrevious messageNext messageBottom of page Link to this message

Sportyeric
Posted on Wednesday, February 16, 2011 - 01:32 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

That was an interesting read at the link that Serialk provided. However, if that is what Foximus is basing is opinion on, I don't see the support. In fact, Aaron says, "Likewise, an XB or 04-up XL1200R/C head is better than the Thunderstorm at any given prep level, although the difference diminishes at the higher levels."
The XB head does have a squish area but it is flat and matches the piston, not angled and so can be improved by machining an angled squish band and using a domed piston to match. Valve shrouding is only an issue with the Lightning and 1200S heads, according to what I read there.
As an aside,I followed Aaron's process (and, in fact, his specific instructions) on improving the Lightning heads using Thunderstorm pistons for my Sportster and it runs considerably faster than my unmodified Thunderstormed Buell.

As to the initial post, given that the front fails in this fashion somewhat frequently, I suspect there would be few fronts sold alone on eBay. However, a used pair could probably be had for not much more than the cost of welding and machining your current broken one and would be more reliable IMHO.
Top of pagePrevious messageNext messageBottom of page Link to this message

Guell
Posted on Wednesday, February 16, 2011 - 01:57 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

sportyeric, can you tell a big difference on the lightning heads after reworking them? I would consider doing that with my cyclone since it apears to be a more cost effective way than new heads etc.
Top of pagePrevious messageNext messageBottom of page Link to this message

Foximus
Posted on Wednesday, February 16, 2011 - 03:12 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

.... really?


lol
Top of pagePrevious messageNext messageBottom of page Link to this message

Buellistic
Posted on Wednesday, February 16, 2011 - 05:18 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Anybody put XB valves in the THUNDERSTORM and then RE-flow them comparing the difference between the heads ???
Top of pagePrevious messageNext messageBottom of page Link to this message

Cyclonemick
Posted on Thursday, February 17, 2011 - 09:10 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Have a question kind of related...I'm gettting ready to install a used front motor mount on my cyclone and think it would be a good idea to install new bolts! The old bolts are fine but figure it would be a good idea to go ahead and get new ones! Since I only have a Service Manual and not a parts book, Can someone give me the part #'s for those two Bolts? (the ones that mount to the head)
Top of pagePrevious messageNext messageBottom of page Link to this message

Jramsey
Posted on Thursday, February 17, 2011 - 09:37 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Bolt#AA0618.1CZ

You need to be sitting down when they give you the price.

IIRC Al used to stock them.

Here ya go.
A17049-B - 96-02 Front Motor Mount Bolt Kit

Price:

$19.90

(Message edited by jramsey on February 17, 2011)
Top of pagePrevious messageNext messageBottom of page Link to this message

Cyclonemick
Posted on Thursday, February 17, 2011 - 11:17 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Thanks! I'll check out American Sport Bike First!
Top of pagePrevious messageNext messageBottom of page Link to this message

Sportyeric
Posted on Thursday, February 17, 2011 - 01:02 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Replacing "mission-critical" bolts such as those is recommended whenever they are removed, IMHO.
@ Guell (and Foximus) there is this:
http://www.badweatherbikers.com/buell/messages/384 2/125502.html
Took a lot of time but I'm pleased with the results. I may try to dyno it next year if I stumble upon one.
Some of my ideas there were incorrect, it turns out. I now believe T-Storm heads, given the same treatment, would be better. An incompetent shop put an end to that on my Buell heads (for now.)
Top of pagePrevious messageNext messageBottom of page Link to this message

Cyclonemick
Posted on Thursday, February 17, 2011 - 01:36 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I'm in luck, American Sport Bike does have them! sucks they are $10 bucks a piece!
Top of pagePrevious messageNext messageBottom of page Link to this message

Guell
Posted on Thursday, February 17, 2011 - 02:16 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I emailed nrhs and was told a stage 2 lightning head makes about the same as a stage 2 t-storm. I think I might be heading in that direction now
Top of pagePrevious messageNext messageBottom of page Link to this message

Foximus
Posted on Thursday, February 17, 2011 - 04:37 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Top of pagePrevious messageNext messageBottom of page Link to this message

Rick_a
Posted on Friday, February 18, 2011 - 09:37 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

One huge benefit to XB/'04+ XL heads is that the engine mount area is much beefier than those prior. The T-Storm and older heads have mounts designed for XL's having downtube frames.
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration