Author |
Message |
Torontobuell
| Posted on Sunday, October 11, 2009 - 01:12 pm: |
|
How do I fog the uly motor. |
Hooper
| Posted on Monday, October 12, 2009 - 12:05 am: |
|
I love the Uly motor so much sometimes that I, too, want to fog it, but I'm still not sure how to best do it. I can't wait for someone more experienced to help us. |
Bosh
| Posted on Monday, October 12, 2009 - 02:18 am: |
|
I love the Uly motor so much sometimes that I, too, want to fog it That's nasty. This is a PG rated forum. |
Prowler
| Posted on Monday, October 12, 2009 - 07:00 am: |
|
Typical fogging method is to remove the airbox cover and (once the engine is warmed up and IDLING), spray fogging oil (I've been using NAPA brand) into the air intake until the engine dies. Then you're supposed to remove the plugs and spray into the cylinders, and turn the engine over a couple times slowly to coat the rings and cylinders. I skip the last part as the oil sprayed into the intake seems to do a good job of coating the cylinders all by itself. |
Torontobuell
| Posted on Monday, October 12, 2009 - 08:55 am: |
|
Thank you. I was worried about clogging up the intake. This answers my question |
|