Author |
Message |
Jphish
| Posted on Thursday, September 03, 2009 - 12:47 pm: |
|
OK - Damn...it's that time - maybe my first and only change. Manual provides the distance but not volumetric capacity of fork tube oil. Can anyone provide approximate volume required - do I need 2 pints, 2 quarts or what. It's an 08' if it matters. Thanks Mucho, j |
Hughlysses
| Posted on Thursday, September 03, 2009 - 01:04 pm: |
|
IIRC 3 pints will be more than adequate. |
Glenn
| Posted on Thursday, September 03, 2009 - 01:14 pm: |
|
I used 14oz of fluid in each of my 2007 forks. The measurement down from the top with the forks fully compressed and no spring inserted I set at 172mm per the "Anonymous" posting. |
Jphish
| Posted on Thursday, September 03, 2009 - 05:30 pm: |
|
Thank you Gentlemen. (Can we legally use that salutation with Uly owners ?) |
Nobuell
| Posted on Thursday, September 03, 2009 - 05:34 pm: |
|
Had me confused |
|