Author |
Message |
Thrux181
| Posted on Wednesday, January 14, 2009 - 04:02 pm: |
|
If you put a 06 seat on a 08 Uly, do you need to leave the ECM block on the ECM? Thanks, Bill |
Froggy
| Posted on Wednesday, January 14, 2009 - 04:13 pm: |
|
If you don't want to risk damaging the ECM with your fat ass, then yea Edit, thought you meant the low seat. Either way it wouldn't hurt (Message edited by Froggy on January 14, 2009) |
Thrux181
| Posted on Wednesday, January 14, 2009 - 05:55 pm: |
|
Thanks Froggy, I got a cut down 06 stock seat. Feels more narrow near the front. Trying to get a little more foot on the ground. |
Etennuly
| Posted on Wednesday, January 14, 2009 - 06:35 pm: |
|
The seat 'pans' are the same on the '06 stock as is the low and the '08 stock. The block will be working the same with all of them. |
Thrux181
| Posted on Wednesday, January 14, 2009 - 07:47 pm: |
|
Thanks Vern. Did you tell Froggy I had a fat ass? |
Froggy
| Posted on Wednesday, January 14, 2009 - 08:26 pm: |
|
I thought having a fat ass was a Uly prerequisite? |
Sayitaintso
| Posted on Wednesday, January 14, 2009 - 08:47 pm: |
|
Hey I resemble that remark...oops I meant resent |
|