Author |
Message |
Xring60
| Posted on Wednesday, December 03, 2008 - 12:16 pm: |
|
There were a few of you guys who had requested billet foot pegs with more traction than stock. Well they have arrived. These pegs will accept all of the stock foot control positions with out any modifications. Large pockets have been machined to allow for mud, rocks, dirt, etc... to fall through. They retain the stock 1" drop and are finished in a Hard Black Anodize. Here is a direct link to our site. http://www.preeng.com/xcart/product.php?productid=27&cat=8&page=1
|
Nipsey
| Posted on Wednesday, December 03, 2008 - 12:50 pm: |
|
oooooooooooooooooooooooooooo |
Froggy
| Posted on Wednesday, December 03, 2008 - 03:56 pm: |
|
Damn you guys "Oh lets wait till a day after Froggy gets the new black 09 pegs, then we will release something nice" |
Froggy
| Posted on Wednesday, December 03, 2008 - 03:57 pm: |
|
Oh yea, they do look great. Shouldn't take me long to grind off half the Uly pegs again, so this will be my replacement |
12bolt
| Posted on Wednesday, December 03, 2008 - 04:34 pm: |
|
Nice! I just ordered a set. I'll try to remember to leave some feedback when I get them. |
Ulynut
| Posted on Wednesday, December 03, 2008 - 08:02 pm: |
|
Sweeeeeeeeeeet!!!! |
Maximum
| Posted on Wednesday, December 03, 2008 - 08:16 pm: |
|
Very nice, I love everything that I have purchased from Andy...but I'm with Froggy on this one. I just ordered the '09 pegs last week. But I will need the black shifter and brake levers soon! |
Ft_bstrd
| Posted on Wednesday, December 03, 2008 - 08:59 pm: |
|
Hey Andy, I emailed you a while ago. Any chance of a peg with no drop for the Uly? I would like to have a peg more like the R peg with NO drop. I need one inch less drop (and one inch greater ground clearance). The Buell engineers, in their infinite wisdom, made the Uly peg slots incompatible with any other model's pegs. Why? I have no friggin idea. |
Firstbatch
| Posted on Wednesday, December 03, 2008 - 09:09 pm: |
|
That makes 3......just opened the box last night from Appleton with a new set of '09 pegs.....have not installed them yet but the design changes look like they will provide the needed no-slip feel. Installed Andy's new shift and brake levers last week. Sweeeet. Really like your new pegs Andy.....great job filling a real void in the marketplace for alternative pegs for the Uly. If I had not just bought the '09 pegs I would be clicking a pair into the cart tonight! Dying to give your design a test ride!! |
Hooper
| Posted on Wednesday, December 03, 2008 - 11:31 pm: |
|
I LOVE the look and spikiness. Do these pegs or the ones like them (Touratech) increase riding vibes or any kind of foot discomfort, above and beyond the stock '06ers? |
Tipsymcstagger
| Posted on Thursday, December 04, 2008 - 12:26 am: |
|
I have the Touratech pegs now and will be replacing them with the new Pr-Eng pegs. Ft_Bstrd...the Touratech's are a bit higher than the stock pegs. Let me know if you're interested. Tipsy |
Ft_bstrd
| Posted on Thursday, December 04, 2008 - 01:48 am: |
|
Might be, Tipsy. |
Prowler
| Posted on Thursday, December 04, 2008 - 06:57 am: |
|
I've ridden with these pegs and they are very comfortable. I had a set of Touratechs (edit: sorry, meant to say American Sport Bike Crossroads pegs), but really wanted the extra inch of leg room back and frankly, I was concerned that someday I'd run my leg along the American Sport Bike/Crossroads pegs and rip out half the muscles in my leg..... These are nice pegs, grippy (is that a real word?) and a very comfortable platform for your boots/shoes. I'd recommend them for sure. (Message edited by prowler on December 06, 2008) |
Jphish
| Posted on Thursday, December 04, 2008 - 09:17 am: |
|
Hey Andy - Got your 1" risers, now sign me up for the pegs. Finally someone heard the plea for pegs that do the job in the mud but retain the ergonomics so ya don't have to completely rearrange shifter placement. Thanks!!! Prowler - 'Grippy' may not have been a webster word...but it is now admitted to the lexicon of BWB dictionary. j |
Joenuclear
| Posted on Thursday, December 04, 2008 - 09:10 pm: |
|
Is the preeng site down? |
Florida_lime
| Posted on Thursday, December 04, 2008 - 09:15 pm: |
|
It wasn't yesterday, but appears down today. |
Road_kill
| Posted on Thursday, December 04, 2008 - 09:28 pm: |
|
I bought a pair billet footpegs from American Sport Bike p/n9188. When they arrived, I noticed they would be ~1 in taller compared to stock (before they put the note on the website). Didn't want this so they sit in the bag unopened. Anyone interested? Send PM. Looks like I'll be selling these to get the preeng version - they look great. |
Froggy
| Posted on Thursday, December 04, 2008 - 09:56 pm: |
|
Their stuff is so awesome that Chuck Norris tried to order something to mount to his feet, then the server died. |
Bertotti
| Posted on Thursday, December 04, 2008 - 10:01 pm: |
|
Will they work in the pillion position? |
Skinstains
| Posted on Friday, December 05, 2008 - 12:24 am: |
|
Hey road kill, what part # are the pegs you want to lose ? |
Road_kill
| Posted on Friday, December 05, 2008 - 11:02 pm: |
|
Skins, American Sport Bike p/n9188 See http://www.americansportbike.com/shoponline/ccp0-p rodshow/9188.html |
Skinstains
| Posted on Saturday, December 06, 2008 - 12:05 am: |
|
Those are the Crossroads pegs. I bought a pair for my kid. They are seriously sharp. When new they could easily cut you. If you put just a little bit of pressure on them with your hand you will bleed. Awesome ! I will have to pass on them as I've spent almost all of my 401 already and don't really need them. |
12bolt
| Posted on Sunday, December 07, 2008 - 11:51 pm: |
|
Got my new pegs and 1" risers the other day. They look to be very good quality and the grip on those pegs is wicked! Haven't had time to mount them up yet. |
Skinstains
| Posted on Monday, December 08, 2008 - 10:00 pm: |
|
Roadkill, what do you want for them ? Maybe Santa will get them for the boy. |
12bolt
| Posted on Saturday, December 13, 2008 - 05:55 pm: |
|
Pegs are awesome! Your feet are not going to slip off of these! Great quality and fit! |
Desmo900
| Posted on Monday, December 22, 2008 - 10:37 pm: |
|
Love my new pegs. the larger platform size is much appreciated by my size 13EE feet. And they look bitchin' too.
|