G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Mfell2112 Posted on Thursday, June 15, 2023 - 11:38 pm:        Anybody run 7/8 pro taper bars on Cyclone? Which bend? I would love a more upright seating position maybe close to the Buell touring bars. I would be great that I could use the stock throttle and clutch cables (Message edited by mfell2112 on June 15, 2023)   Jamie04 Posted on Monday, June 26, 2023 - 11:40 am:        I don't have any experience with Pro Taper bars, but I have been using the P3 (i.e. Blast) bars for many years, in addition to 1 inch risers. I was able to keep the OEM cables with a little adjusting of cable supports. The P3 bars fit better (and felt better) after I cut them in the middle and welded a small tube section to widen the bars by 3/4 inch. This allowed better clearance for the uprights around the instrument cluster and provided more feeling of control with the slightly wider hand placement. Good luck.   Captainkirk Posted on Wednesday, July 26, 2023 - 09:57 pm:        I have S3T bars on my 99 M2 installed by the PO (or his shop)...I love them! Seating is upright and comfortable, no carpal tunnel or wrist issues. See if you can find a set of them. Direct bolt-on.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: