Author |
Message |
Williamscottrobertson
| Posted on Sunday, January 20, 2019 - 10:31 pm: |
|
I bought a new to me set of controls for my S1W, that came with cables. However, the cables I took off are straight and these have a 90 degree elbow. I think they will still work. The controls were listed for a 98 M2. Maybe that’s the difference? Anyone have some insight? The adjuster thread sizes are the same.
(Message edited by Williamscottrobertson on January 20, 2019) |
Ratbuell
| Posted on Sunday, January 20, 2019 - 10:54 pm: |
|
I've had some tubers with straight cables at the carb end, and I've had some with 90s at the carb end. Oughta just be a matter of routing so they don't bind or rub... |
Jayvee
| Posted on Tuesday, January 22, 2019 - 12:38 pm: |
|
My 2000 M2 has straight, so possibly early vs late M2 ? One wouldn't expect it to be random. |
Williamscottrobertson
| Posted on Tuesday, January 22, 2019 - 04:39 pm: |
|
I’m sure different part numbers. I’ll have to try to look it up for different years. |
Mhlunsford
| Posted on Wednesday, January 23, 2019 - 08:09 pm: |
|
my M2 had the bends which were needed to clear the tack. If straight would need to be long and go across the dash and down. |
|