| Author | Message | ||
     Davincisgarage |
Hey there, just wondering if the pulley bolt pattern for the rear is the same as the 5 bolt 91-03 XL patter. Im running the chrome 3 winged 2piece wheels. Im doing a chain conversion and had to order new sprockets.. Thanks | ||
| Madmacks |
the bolt pattern is the same but you will need to machine the center hole out to fit the PM wheels if you use a sportster sprocket. I've done a few of these conversions | ||
| Davincisgarage |
Thanks @madmacks. I ordered a 25 tooth drive sprocket .5 inch offset and a flat 54 tooth wheel sprocket with a spacer. I think the chain will line up and give me enough clearence on the swing arm. I will have to grind down the engine mount and put some delrin on the swing arm for slap but i think this will work out! I will do a thread with details when im done. | ||
| S1owner |
Why? | ||
| Madmacks |
the offset sprocket will give you grief. If you offset the drive you need to offset the rear as well to keep the chain straight. Even With only a 1/4" offset I had issues with the chain interfering with the frame on the outside just above the isolator. I run no offset on either and a 190 tire on my drag bike. why??? to fit the 190 tire and change gear ratio on the final drive. | ||
| S1owner |
190 fit on mine with stock belt and pulley But tobeach their own |
