| Author |
Message |
    
Eagleman
| | Posted on Monday, August 15, 2011 - 06:11 pm: | 
|
Going to follow the 101 class in chain adjustment, I took a quick peek in the access hole. My tensionor plastic looked ok, chain seemed very loose in the spot it was at like 5/8 in that spot. I could see cut marks inside the case.
If it would stop raining long enough I could adjust it. |
01x1buell
| | Posted on Monday, August 15, 2011 - 06:20 pm: |
|
i here you about the rain man it is wet as hell around here. |
Kalali
| | Posted on Thursday, August 18, 2011 - 10:31 am: |
|
"My tensionor plastic looked ok,.."
Hmmm, so you're able to see the tensioner from the inspection hole by just peeking through it? How is that possible? |
Eagleman
| | Posted on Thursday, August 18, 2011 - 10:46 am: |
|
I could be wrong, I looked down in the hole could see the chain resting on a price of white/yellow plastic. It was located in the general area of the chain adjusting screw.
Just checked manual, it is directly below the hole.
Should I not be able to see it? |
Oldog
| | Posted on Thursday, August 18, 2011 - 11:09 am: |
|
Mirror |
Kalali
| | Posted on Friday, August 19, 2011 - 10:49 am: |
|
I guess I never looked down far enough or in the correct angle. I'll try it this weekend. Will try the mirror trick as well. Good to know it is possible.
My next (big) toy is going to be one of those little camera thingys to poke around tight areas... |
|
