G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Af226 Posted on Saturday, February 12, 2011 - 05:48 pm:        I have a jingle. One of my rear foot pegs has loosened off....how do u tighten it up? Not sure how to hold the back side to torque on it? Hard to get a look at. Thanks   Fuzzz Posted on Saturday, February 12, 2011 - 05:57 pm:        Ummm, could you be a bit more specific? Year, model? My 00 M2 rear pegs have a 3/8 allen head bolt with 9/16 nut, right out in front of God and everyone else, the tabs the bolt runs through are welded on the subframe...   Ratbuell Posted on Saturday, February 12, 2011 - 06:02 pm:        If its your X1, there is a nut and bolt through the mount. You can tighten it to squeeze the frame onto the peg, stopping the rattle...or you can get a wave washer, which I believe is factory on them anyway. If you think of it as a stack, from one side, you have: Bolt head Frame tab Footpeg itself Wave washer Other frame tab Nylock nut on bolt   Af226 Posted on Saturday, February 12, 2011 - 06:50 pm:        Sorry. Guess it was kinda vague. Its a 00 X1. Its the peg mount that is loose. I can turn the the left rear peg around completely. Its the mount to the frame not the actual peg that is loose. I used a mirror to try and see what is backing the bolt/stud but it just looks like a round flat nut and I can't thing of a way of keeping it stationary to tighten the peg? Front pegs are just bolted from the backside but the rear seems to have a nut of some sort? Hope this makes it clearer   Ratbuell Posted on Saturday, February 12, 2011 - 07:21 pm:        Pictures? PM Babired. She's restored a couple X1's, bet she can set you straight   Ratbuell Posted on Saturday, February 12, 2011 - 07:22 pm:        If you want to find her posts for a PM, check the DC/MD/VA storm fronts section...   Jramsey Posted on Saturday, February 12, 2011 - 07:24 pm:        If you're talking about where the wishbone bracket mounts to the frame the frame plates are investment cast and the back side of the top hole has a six point recess to match the nut(1/2"), no need for a wrench. The bottom mount hole is threaded. If you mean the peg yoke to the wishbone its a flat head socket cap screw that takes a 5/16" hex key. (Message edited by jramsey on February 12, 2011)   Af226 Posted on Saturday, February 12, 2011 - 08:57 pm:        AAAHHHHH!!! Now I get it. http://cgi.ebay.ca/11-5-1999-2002-Buell-X1-rear-fo otpeg-mounts-/390287718148?pt=Motorcycles_Parts_Ac cessories&hash=item5adef5f704 5/16" it is. Thanks.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: