G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » Old School Buell » Archive through May 17, 2009 » M2 Fork Issue « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Redefine420
Posted on Monday, May 11, 2009 - 12:11 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

So I had the forks of to change the fork oil and I ran into an issue. The manual says to turn the adjuster screw clockwise until it stops, then turn it counter clockwise 5/8 turn until the dots align. My issue is that one of the adjuster screws turns until it is below the top of the fork, the other side stops well above. When I turn them counter clockwise until the dots align the two sides are not even close to even. Is there something wrong with either fork, or is it me(quite possible)? This may be hard to follow so I posted pictures of what I'm trying to explain.

Top of pagePrevious messageNext messageBottom of page Link to this message

Benm2
Posted on Monday, May 11, 2009 - 12:32 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Here's my guess, assuming that your forks are similar to the forks in my 2000 M2:

There's a portion of the fork at the top end where the rebound adjuster screw assembly attaches to the damper cartridge. This assembly threads onto the cartridge, and is lock-nutted in place on the damper rod. It sounds like yours was taken apart, then not reset properly.

BTW, pictures dont show up.
Top of pagePrevious messageNext messageBottom of page Link to this message

Sleez
Posted on Monday, May 11, 2009 - 12:34 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

i see the pics just fine.
Top of pagePrevious messageNext messageBottom of page Link to this message

Benm2
Posted on Monday, May 11, 2009 - 02:27 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Must be a work filter. I check from home later.
Top of pagePrevious messageNext messageBottom of page Link to this message

Redefine420
Posted on Monday, May 11, 2009 - 03:27 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I took them apart again this afternoon. You were right Benm, the lock nut was not set properly and it threw everything off. So I'd say that was a good guess. Good diagnosis without even seeing the pictures. Thanks, its all good now.
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration