| Author |
Message |
    
Flyby
| | Posted on Sunday, May 27, 2012 - 03:09 pm: | 
|
Installed an aftermarket tail light with integrated signals on my 2005 blast which works perfectly, that is until I connected the signals wires that came with the lights.
There was only 1 wires for each blinkers on the new tail light. On the stock harness, there are 2. I wasn't sure which wires to connect the new tail light so I just plug it into one of the connector on the original wire. As soon as I did that, I heard a click and the entire tail light went dead. My guage is also dead too. The only thing that comes on is the "HIGH BEAM" indicator.
FYI headlight, all 4 turn signals, horn and bike still turns on. I have no idea whats going on or how to fix this issue. Please help. |
Voltage
| | Posted on Thursday, June 14, 2012 - 09:39 pm: |
|
check fuses if blown replace then try other wire. if that blows then update post |
|
Troubleshooting (Poor Starting/Running/Handling/Ride Issues) »
Archive through October 27, 2012 »
HELP! buell blast tail light and guage instrument dead...