|Posted on Monday, February 27, 2012 - 05:04 pm: ||
Trying to remove muffler from a 2008 Uly XB12X. Pinch bolt is out, made my own tool to fit into axle - CAN NOT turn that thing-( and don't say wimpy )All the manual references to the exhaust or tension pulley say you have to "un-thread" the axle - What's the trick
|Posted on Monday, February 27, 2012 - 05:22 pm: ||
Stupid question, why are you fooling with the axles if you are only trying to remove the exhaust?
Anyway, it sounds like the axle did not have enough anti-seize coating on it, and it seized to the bearings. Time to break out the cheater bar, and be sure to inspect the bearings when you get the wheel off.
|Posted on Monday, February 27, 2012 - 08:47 pm: ||
Reverse thread on the front axle in case thats the one your trying to loosen