Author |
Message |
Yeags30
| Posted on Friday, February 18, 2005 - 03:00 pm: |
|
for those of your running a d&D on your bikes what do you do with the front mounting bolt. The instructions don't mention it. I found a bolt with washers but no nut. My question is it suppossed to float around on that mount because of the insert in that hole? Or do i take that silly insert out, or do i get a bigger washer so everything bolts up tight?? |
Daveinm
| Posted on Friday, February 18, 2005 - 03:12 pm: |
|
Take the bracket off and put the bolt through that hole. I think you need to use washers on both side. I think you can also use the nut that was holding the bracket on there. You can probably use the existing bolt for that matter. |
Dtx
| Posted on Friday, February 18, 2005 - 03:19 pm: |
|
I put mine on two weeks ago. I second that Daveinm. |
Rpmchris
| Posted on Friday, February 18, 2005 - 05:22 pm: |
|
Ditto. |
|