G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Billp Posted on Sunday, June 06, 2010 - 10:31 pm:        I cannot remember the last time my primary fluid was changed. oops. So I changed it (syn3) but the I had a hard time figuring out how much fluid to put in there. The manual says approx 1 qt. and it has a nice diagram with a dashed line for the level. But when I did mine I had a hard time determining if it was correct or not. So I used 1 qt plus an extra ounce or two for good luck. I'm guessing that it will be fine and is not overfull but it was just hard to tell. Any suggestions on how much to actually put in there ? In the future should I just go with 1 qt and call it good ? Thanks. Bill, Charlotte NC 03XB93, 09XB1125R   Nickh Posted on Sunday, June 06, 2010 - 10:35 pm:        1 quart and call it good. -Nick-   Buell_41 Posted on Friday, June 11, 2010 - 11:51 pm:        1qt on rear wheel stand.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: