Author |
Message |
Spatten1
| Posted on Thursday, November 26, 2009 - 02:39 pm: |
|
I've got a warped front rotor and found a couple of problems that other XB owners may want to look at if you are getting brake pulsing. One of the thick spacers that the disk floats on- A) Was frozen to the bolt and not floating B) Too short to allow the disk to float C) Had a burr on it, probably related to A and B. Just wanted to share my issues. I seem to get every unusual failure imaginable, so it may not be a common issue, but one to keep in mind. |
Spatten1
| Posted on Thursday, November 26, 2009 - 02:45 pm: |
|
PS, the quick check is: When you pull your wheel, make sure that the disk will move up and down slightly at each bolt. |
|