G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » XBoard » Buell XBoard Archives » Archive through November 13, 2003 » Xb forks part II « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Misato
Posted on Wednesday, October 22, 2003 - 02:36 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

so I finally get the leaks fixed. I'm washing the forks and see 2 pieces of clear tape.. wtf? I then realize that the fork needed to be turned 180 degrees and the tape is to the outside instead of being in the inside so the brake lines rub on it. IDIOTS.
but what really pisses me off is that the left fork (right one was leaking) now "moves" front to back. when I put the brakes on and off just sitting on the bike, you can see the lower tube move forward and back inside itself (like there is no upper bushing inside). that can't be good
Top of pagePrevious messageNext messageBottom of page Link to this message

M1combat
Posted on Wednesday, October 22, 2003 - 11:09 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

As I recall... If you get any sort of front/back play in the forks (Probably worse if it's only one...) of a bike it's really good for setting up a high speed wobble... Someone who knows for sure please chime in.
Top of pagePrevious messageNext messageBottom of page Link to this message

Daves
Posted on Wednesday, October 22, 2003 - 12:05 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Misato,
What's the dealer say?

Ride to the edge!
Dave
Top of pagePrevious messageNext messageBottom of page Link to this message

Prof_stack
Posted on Wednesday, October 22, 2003 - 01:29 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Tim, find out which mechanic worked on your XB. Let me know (privately please) and I will make sure he DOESN'T do my 10k service.

This stuff make me mad. You too?

Duh...
Top of pagePrevious messageNext messageBottom of page Link to this message

M1combat
Posted on Wednesday, October 22, 2003 - 01:57 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Also Misato... I just took a look at your profile... Are those pipes the "force Nallin" exhaust?? What are those? Do they work well?
Top of pagePrevious messageNext messageBottom of page Link to this message

Bads1
Posted on Wednesday, October 22, 2003 - 02:09 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

M1combat that is the Nallin Force pipe and it works excellent but its been known to crack at the mount underneath.
Top of pagePrevious messageNext messageBottom of page Link to this message

Misato
Posted on Wednesday, October 22, 2003 - 03:19 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I haven't been back to them, it was destination HD. DHD is going to do some work for me so I'm going to have them fix that also..
yup. force/nallin
I've heard they fixed whatever was making them crack at the mount. mine is still ok so far.
now that i've found a good map to load, that setup works great.. I'll have the new dyno run in a few weeks..
Top of pagePrevious messageNext messageBottom of page Link to this message

99buellx1
Posted on Wednesday, October 22, 2003 - 03:30 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Pray tell, which map did you load, or was is custom mapped to your bike?


Craig
Top of pagePrevious messageNext messageBottom of page Link to this message

Misato
Posted on Wednesday, October 22, 2003 - 06:17 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

the one that came with it made 78HP and was bad low-mid..(also way lean)
this one I could tell right away, low and mid were very noticable and I finially got to race my freind again with this map and huge difference in performance.
someone sent it to me, he had it mapped at fast by ferracci for his bike. I sent it to another guy in cali and he said it was a big improvement also..
Top of pagePrevious messageNext messageBottom of page Link to this message

Bucknut
Posted on Wednesday, October 22, 2003 - 08:10 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Can't wait to see the dyno numbers.
Top of pagePrevious messageNext messageBottom of page Link to this message

Misato
Posted on Thursday, October 23, 2003 - 11:24 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

me too..
and thanks!
Top of pagePrevious messageNext messageBottom of page Link to this message

Misato
Posted on Monday, October 27, 2003 - 05:01 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

well its in the shop again.. new tire, oil leak from top of rear cyl, fix the forks (hopefully for good), new seat(rubbed through) and another dyno run..

oh yeah, 1k miles on my force/nallin and the front mount is broke.
Top of pagePrevious messageNext messageBottom of page Link to this message

Misato
Posted on Monday, October 27, 2003 - 05:41 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

break
Top of pagePrevious messageNext messageBottom of page Link to this message

Shazam
Posted on Monday, October 27, 2003 - 06:44 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

looks familiar.....sorry to hear.
Top of pagePrevious messageNext messageBottom of page Link to this message

Misato
Posted on Thursday, October 30, 2003 - 08:47 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

well, they took the forks apart and they are grooved so I'm getting new ones.. so thats another week or 2.. I wanna do the dyno with that map..
Top of pagePrevious messageNext messageBottom of page Link to this message

Bucknut
Posted on Saturday, November 01, 2003 - 05:15 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Misato, I noticed the weld cracking on my Force today. Not as catastrophic as yours but I'm going to keep an eye on it. If it gets worse I'll either have it welded myself or send it back. I have a carbon fiber chin spoiler so I wonder if it being lighter is easier on that bracket. It's a damn shame because I love the pipe (sound, power and look)...not to mention, it cost a heap of money. Anyhow, I changed my oil today at 500 miles and could not believe all the metal on the magnet drain plug...must be from the dyno runs.
Top of pagePrevious messageNext messageBottom of page Link to this message

Misato
Posted on Monday, November 03, 2003 - 11:43 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I changed mine at 500 also. it looked like metallic paint..
when I get the bike back I have to send the exhaust back to force. she said the new ones were not shipping yet..hmmm. at least its winter.
Top of pagePrevious messageNext messageBottom of page Link to this message

Misato
Posted on Thursday, November 06, 2003 - 11:53 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

its almost back...
"WE HAVE REPLACED YOU REAR TIRE, REPLACED BOTH FORK TUBES AND BUSHINGS, REPLACED FT ISO MOUNT, REPLACED SEAT, ADJUSTED STEERING HEAD BEARINGS. TECH SAYS BIKE HANDLES AND PREFORMS GREAT WITH NO LEAKS.
TALK TO YOU SOON. IF IVE MISSED ANYTHING LET ME KNOW.

I didn't know the ft mount was bad..?
anyone else leak oil from the top of the rear cyl? its leaks down and all the way back to the fan. then it blows on my polished rear tail..
anyway I'm hoping to get another dyno run with that map real soon.
Top of pagePrevious messageNext messageBottom of page Link to this message

Hippo888
Posted on Thursday, November 06, 2003 - 04:37 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Misato,

Mine is puking oil from what looks to be the crankcase breather on the top of the rear cylinder. I'm putting in a new velocity stack/snorkel after the "girlfriend incident" and will take a closer look at it this evening.

Paul in MI
Top of pagePrevious messageNext messageBottom of page Link to this message

Misato
Posted on Thursday, November 06, 2003 - 04:47 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

um, 'girfriend incident'?
thats where it looks like mine is coming from
Top of pagePrevious messageNext messageBottom of page Link to this message

Hippo888
Posted on Thursday, November 06, 2003 - 10:35 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Misato,

The "girlfriend" incident resulted in my XB9S's velocity stack being ripped out of the bike.

If you open up your airbox, there are two rubber tubes near the IAT sensor. One tube goes to the front crank breather, the other goes to the rear crank breather.

My rear crank breather doo-hicky was kind of loose. It was flopping around. I thought I'd look at it more closely tonight, but my replacement velocity stack was mis-ordered and I'm waiting for the right part to arrive.

Looking at the manual, there's a grommet in the valve cover that the breather doo-hickey press fits into. I think the doo-hickey is no longer firmly pressed into the grommet. I'll let you know when I get my part in.

Paul in MI
Top of pagePrevious messageNext messageBottom of page Link to this message

Buckinfubba
Posted on Friday, November 07, 2003 - 08:20 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Thats probably what it is. if the valve gets turned in the grommet it kinda lifts and leaves a space. Therefore you have leakage.
No big deal just put it back right.

Brian
Tilley hd/buell
Top of pagePrevious messageNext messageBottom of page Link to this message

Misato
Posted on Friday, November 07, 2003 - 11:19 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

ahh, I probably did that when I put the PCIII in it...
Top of pagePrevious messageNext messageBottom of page Link to this message

Fullpower
Posted on Friday, November 07, 2003 - 05:33 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

you have a PCiii on an XB? how does that work.
where did you put it, and how does it connect? thanks for info... dean
Top of pagePrevious messageNext messageBottom of page Link to this message

Easyflier
Posted on Friday, November 07, 2003 - 06:09 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Fullpower, it uses the X1 unit and hooks up the same way. Plug it into the injectors, connect it to ground and optionally install the o2 sensor. After that is done take it to a Dyno Tech PC tuning shop and have them map it for you. The real trick is finding a shop that knows how to do Buells, and is willing to do it. Expect to drop $150-300 for a good map. Best I've seen is the one that Fast by Ferracci did with a Force pipe, that's the one that Misato is using though the map was done for another bike.
Top of pagePrevious messageNext messageBottom of page Link to this message

Daves
Posted on Friday, November 07, 2003 - 06:40 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

We have a map that works great!
89 HP on an otherwise stock XB9R
Force pipe,air filter O2 sensor and PCIII

Ride to the edge!
Dave
Iowa HD/Buell (Buell Cycle Center)
Top of pagePrevious messageNext messageBottom of page Link to this message

Easyflier
Posted on Friday, November 07, 2003 - 07:02 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

DaveS,

Did you guys map it or have it done locally?
Top of pagePrevious messageNext messageBottom of page Link to this message

Misato
Posted on Friday, November 07, 2003 - 07:05 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

the map that came with it is crap. 78hp

I mounted it in the airbox.. hidden away..
I will have the new dyno sheet by tuesday, with the feracci map and hopefully its MUCH better. I can definately tell it runs a WHOLE lot better with this map. I couldn't find anyone up here that sounded like they knew what the hell they are doing with buells.
some pics
http://www.xb9s.com/pics/dyno/dyno.htm
Top of pagePrevious messageNext messageBottom of page Link to this message

Xb9
Posted on Friday, November 07, 2003 - 10:59 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I'm running a Latus equipped XB with the PCIII & the HP O2 sensor, Stock ECM. I've had good results just using the button adjustments, and it really improved mixture/performance at 2500-4000 RPM.
Top of pagePrevious messageNext messageBottom of page Link to this message

Misato
Posted on Wednesday, November 12, 2003 - 12:15 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

now I hear the force pipe wont be ready for a month.(mine is cracked)
othernews- forks done and polished covers are on
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration