G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Staindus Posted on Wednesday, May 28, 2008 - 10:28 am:        I am trying to find a mount for my radar detector to fit in the threaded hole where my mirror used to be. I found one at this size: 10 mm x 1.25 Will it fit? I also tried googling badweb and I could not find an answer. Thanks, Rob (Message edited by staindus on May 28, 2008)   Firebolt32 Posted on Wednesday, May 28, 2008 - 11:47 am:        This here is a bar mount. I know it's not what you looking for but it may help. http://www.radarbusters.com/search/index.cfm?Ntt=B uell%20Motorcycle%20Mount&Ntk=all   Staindus Posted on Wednesday, May 28, 2008 - 11:51 am:        Thanks for the link Firebolt32. This is the place I was looking at (I think its the same product) http://www.techmounts.com   Froglosopher Posted on Wednesday, May 28, 2008 - 11:52 am:        Try ram-mount.com they have mounts for almost anything}   Staindus Posted on Wednesday, May 28, 2008 - 12:02 pm:        I want to go with techmounts so I can use the threaded hole that my mirrors were in. I have bar ends now. It seems like it would work nicely I just want to make sure the size is right.   Firebolt32 Posted on Wednesday, May 28, 2008 - 12:04 pm:        Your link has more options. But it claims there are not results for your bike...   Staindus Posted on Wednesday, May 28, 2008 - 12:27 pm:        I know. Either there database is screwed or they have not updated it yet. I am assuming that by Standard "10 mm x 1.25" They mean that most bikes use that size, hopefully including Buell. (Message edited by staindus on May 29, 2008)   Point_doc Posted on Wednesday, May 28, 2008 - 02:21 pm:        When I turned down and threaded the posts from my bar-end mirrors to fit the stock location, I know it was 10mm and I believe the pitch of 1.25 is correct. You can buy a single bolt with that configuration and check, or take a mirror into your local hardware store and check. Also I believe the size/pitch is standard, because some Buell owner's have replaced their mirrors with ones off of an Aprilia with no modifications necessary.   Retrittion Posted on Wednesday, May 28, 2008 - 05:24 pm:        What Aprilia mirrors fit Buell Rs -- I have been trying to figure this out for a while!   Point_doc Posted on Wednesday, May 28, 2008 - 05:35 pm:        Tuono, I saw these on a Uly. The first post mentioned 10mm by 1.25 threads, I had the understanding that it was for a posted mirror. Like the ones used on Lighting's, if I created any confusion, sorry. (Message edited by point_doc on May 28, 2008) (Message edited by point_doc on May 28, 2008)   Staindus Posted on Thursday, May 29, 2008 - 08:25 am:        Thanks Point_doc. I will go to the hardware store and check it to be sure.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: