Author |
Message |
Shrympfrydryce
| Posted on Wednesday, July 19, 2006 - 08:06 pm: |
|
Hello All, I am a new Buell owner as of Monday. I have been monitoring various posts on this site since June and have done a little research on the FAST system. Does anyone know where to get them or is the UK and Germany the only locations. Man you guys are a wealth of knowledge and any help would be appreciated. SFR |
Diablobrian
| Posted on Wednesday, July 19, 2006 - 08:36 pm: |
|
Welcome to badweb! I'd give DaveS a shot. You can contact him through the sponsor board under Appleton H-D/Buell. Hillbilly-Motors-Motors in germany had them last I knew and Dave is the US distributor for them! Oh yeah, congrats on your new Buell too! (Message edited by diablobrian on July 19, 2006) |
Firebolteric_ma
| Posted on Wednesday, July 19, 2006 - 09:01 pm: |
|
call daveS. he had a post a couple weeks ago that he had some. he may even chime in and give ya a price...the badweb price no doubt... you can check my profile to see one on a xb12r. you WILL need to get some sort of tunning w/ that set up on a buell w/ a aftermarket muffler...YOU WILL RUN DANGEROUSLY LEAN w/ a stock ecm...direct link is the best option, but there are others. |
Diablobrian
| Posted on Wednesday, July 19, 2006 - 09:13 pm: |
|
I'll bet if you got Direct link to go with it someone here has a good map for an xb12 with the FAST and a jardine pipe. Right Eric |
Shrympfrydryce
| Posted on Wednesday, July 19, 2006 - 09:22 pm: |
|
Thanks Diablobrian I will look him up. Firebolteric_ma the FAST is only part of the plan for sure. Race ECM, directlink, wideband O2, and looking at Micron Full Race. |
Firebolteric_ma
| Posted on Wednesday, July 19, 2006 - 09:37 pm: |
|
very soon i will have a good one. it has a little cough (sometimes) when taking off from a start again. small surge at idle once in a while also. i had this problem when running the map from al before we got it squared away. i could go back to the last map i had or check the current one to see what he changed.(always an option for now) that's why i really need it on the dyno w/ the bungs installed. need to map each cylinder, if i don't do it this way i am shooting in the dark. hopefully next couple weeks i can get on the dyno. it's in the works as we speak |
Phantom5oh
| Posted on Thursday, July 20, 2006 - 03:11 pm: |
|
Warning, Warning, thread thief! sorry Eric, Who do you use to tune your bike? I'm in MA also and would like to get mine tuned. |
Firebolteric_ma
| Posted on Thursday, July 20, 2006 - 03:33 pm: |
|
i recently had rob from ROBS DYNO SERVICE do it. he came recommended from Al at asb. he is very smart with this stuff. he also has a web page just go to robsdyno dot com. he has a mobile dyno set-up. hope that helps ya! |
Daves
| Posted on Thursday, July 20, 2006 - 05:55 pm: |
|
I have 3 more of them on the way. |