Author |
Message |
Allanflstfi
| Posted on Tuesday, July 28, 2015 - 12:42 am: |
|
I replaced Sprag with new clutch and housing reassembled and I am only getting spin no engagement any suggestions |
Brokengq
| Posted on Tuesday, July 28, 2015 - 01:20 am: |
|
Check and make sure that the direction of the bearings in the sprag are the same as the old one. I know it sounds stupid, but I actually received one that had the bearings popped in backwards, which would result in a free spin of the starter. I caught it before installation and had it swapped as a defective part. |
Stevel
| Posted on Tuesday, July 28, 2015 - 02:07 am: |
|
As Brokenegg stated, these will work in both directions, but disassembly and reassembly is necessary to correct. This is very important.......What is the name and part number on the box of the original manufacturer. If you have it, please let us know. |
Allanflstfi
| Posted on Tuesday, July 28, 2015 - 07:04 pm: |
|
Thanks for the input guys I put the dam thing on backwards got it all taken care of its running again |
Thefleshrocket
| Posted on Wednesday, July 29, 2015 - 12:00 am: |
|
That was pretty quick. Isn't this supposed to be kind of a pain of a job? |
Brokengq
| Posted on Wednesday, July 29, 2015 - 12:43 am: |
|
45 minute job if all tools and parts are in front of you. |
|