G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Jleblanc26 Posted on Wednesday, May 23, 2012 - 01:34 pm:        Can anyone tell me the size of the screw that holds on the resevoir cap? Anyone find a stronger alternative I can get? It stripped fairly easy.   Jdugger Posted on Wednesday, May 23, 2012 - 02:21 pm:        It's a standard M4. I recommend you get ones that are hex drive (will be a 2.5mm drive) and tighten them TWO FINGERS ONLY with the SHORT END of the allen key. Then, they are not so hard to undo later. A tiny titch of anti-seize on the screw isn't a bad idea, either.   Jleblanc26 Posted on Wednesday, May 23, 2012 - 03:00 pm:        Thanks. I had to dremel one out the other day. That sucked, lol.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: