| Author | Message | ||
     Bigbuells |
Ok,long story dont want to talk too much about it,but i let my friend borrow my 2004 buell xb12r and he decides to lay it down at 90-100 mph.And believe me he looks way worse than I ever thought anyone could look.I need a: shifter lever, primary cover,oil cooler cover or shroud,front turn signal,front left fuze box and fuzes,drivers peg,left side air intake,possibly a clutch cable,and I need the gray part in the fairing that holds the speedo and tac,its aboout a foot long T-shaped aluminum part?Also a hand grip and bar end,anyone help out here?My computer has been horrible lately,so it may be a day or two before I respond.It would be nice if I could get most of these with one stone.But beggars cant be choosers. | ||
| Spyder12s |
I have a primary cover that I just took it off today ...small nick on the rear of it think that is all for damage ..and I have clutch cable was sent the wrong one, will get some pics tomorrow for ya where are you located ? | ||
| Bigbuells |
How much for the cover.How bad is the nick? if it is still operational I'm interested in it.How much.Can I ask why you replaced it? | ||
| Bigbuells |
Im In Ohio by the way.Did you replace the gasket when you replaced your primary cover? | ||
| Spyder12s |
25521-02A is the gasket 15.85 34819-03A inspection cover gasket 1.25 25377-03A clutch cover 2.25 that should be all the gaskets you need for that side and the inspection cover and the clutch covers, not sure on prices on those. and as for as changing the cover its pretty easy, I can walk you through it if you like .. | ||
| Spyder12s |
 | ||
| Spyder12s |
 |
