G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Kimberley Posted on Monday, August 10, 2009 - 01:46 am:        I cannot for the life of me get the new stock bar ends to go into the handlebars! I've tried dishsoap, WD40 and a hammer. No go. Suggestions??   Growl Posted on Monday, August 10, 2009 - 02:44 am:        Were the old ons broken off, is there still some in there?   Mnrider Posted on Monday, August 10, 2009 - 11:08 am:        You may have to file the inside of the bar some,mine had a sharp lip on the inside of the bar.   Spacecapsule1 Posted on Monday, August 10, 2009 - 12:03 pm:        stick em in the freezer for a while. meanwhile let the bars sit in the sun and heat up....... should go right together after that.   Thetable Posted on Monday, August 10, 2009 - 01:28 pm:        I threw mine in some boiling water for a bit to soften them up, then beat the crap out of them to get them in the bar. You would be very surprised at how hard you can hit them with a dead blow and not cause damage. Just watch out and make sure that you don't have any skin in the area, or it will get pinched. DAMHIK. (Message edited by thetable on August 11, 2009)   Kimberley Posted on Monday, August 10, 2009 - 07:03 pm:        Boiled 'em......went right in. Thanks!!!

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: