G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Ryker77 Posted on Tuesday, August 28, 2007 - 02:26 pm:        I got a transdapt oil cooler adaptor that mounts behind the oil filter. It is supposed to only flow oil through the filter at 160 then full flow at 180. This would be done by the heat weaking the spring and allowing the ball bearing to become unseated. What confused me is the adapter design. Towards the engine adapter side the oil has a direct path to flow through the oil cooler. It is the only route the oil can take to get. The ballbearing (thermostat) is very small and just looks like it would only act to allow the hot oil to bypass the oil cooler. Once the spring gets hot it would allow the psi to push the ball down and the incoming oil would push right past it and to the filter side. Or am I wrong about the oil flow direction?   Ryker77 Posted on Tuesday, August 28, 2007 - 02:31 pm:        The blue line is the most/only direct and most free flowing route for the oil to flow. It must flow throught the cooler then back in to the top inlet. At that point it would be able to flow through the filter. Through the filter media then return via the center nipple. Once the oil gets hot or oil PSI is great enough it would simply push down the red circled ball bearing and pass straight to the filter inlet. Bypassing the oil cooler.   Ryker77 Posted on Tuesday, August 28, 2007 - 02:41 pm:        Never mind I think I ordered the wrong adaptor. It isn't a themostat adaptor. The ballbearing with spring is probably just a saftey measure. I need to order this one http://store.summitracing.com/partdetail.asp?autof ilter=1&part=DER%2D15702&N=700+115&autoview=sku   Xl1200r Posted on Tuesday, August 28, 2007 - 02:50 pm:        I was gonna say, things weren't making sense there. Hot oil get pushed through the filter instead of the cooler? And cold oil doesn't get filtered? Glad you solved your own problem ;)   Ryker77 Posted on Tuesday, August 28, 2007 - 02:54 pm:        All of the oil would have gotten filtered. Just that there was no thermostat. And the adaptor had a saftey bypass that would allow some (small) amount of oil to bypass the oil cooler if the PSI was too great. Like a crimped oil cooler line.   Fullpower Posted on Saturday, September 01, 2007 - 05:32 pm:        And may I inquire what problem you are fixing with this plumbing kit?

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: