G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Mhlunsford Posted on Sunday, August 10, 2014 - 12:42 am:        I had the cams out put back in it ran for a few blocks now the ignition rotor is not turning?   Mhlunsford Posted on Sunday, August 10, 2014 - 01:20 am:        Just check pistons are moving   Littlebuggles Posted on Sunday, August 10, 2014 - 03:06 am:        Double checked alignment marks prior to putting it all together? Didja get the hardware tight? Cause I'd suspect the screw is loose, or something of the sort.   Littlebuggles Posted on Sunday, August 10, 2014 - 03:17 am:        There's a locking pin on the cam side of the crank - output shaft where you put the bronze oil pump drive gear - that likes to shear off sometimes too.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: