G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Terrycoxusa Posted on Sunday, March 17, 2013 - 08:50 pm:        I installed a clutch lite ramp in my clutch, and now my clutch is dragging. It is adjusted as well as it can be. Has anyone else had problems with these? I also put in a Ulysses clutch spring and I don't think I need them both .   Natexlh1000 Posted on Sunday, March 17, 2013 - 09:05 pm:        Something like that is a tradeoff. It's just leverage and a ramp after all. Now you will need to pull it over a longer distance to have the same effect. I'm not sure there is a winning combo here. I'd guess that you could put the original ramp back in and put a weaker clutch spring but then you would run the risk of a slipping clutch.   Littlebuggles Posted on Sunday, March 17, 2013 - 09:25 pm:        I run the Muller type clutch ramp. Stock spring. The EZ clutch extension that mounts to the stock clutch. the hook for the cable end would drag on the inside edge of the inspection hole opening. I'd suggest you pull the cover off again and check the new ramp's operation and make sure the ramp is retracting all the way. I lost some hand strength after carpal tunnel surgery, but still found the new ramp adequate. I wonder if running the lighter spring may also be causing you some trouble.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: