G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » Old School Buell » Archive through August 19, 2009 » HIT A HUGE POT HOLE! « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Preybird1
Posted on Monday, August 10, 2009 - 11:46 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Dam it! I was behind a big truck and could not see this huge pothole. I hit it at 40 mph really hard in the front, and then a thump on my boot......What was that? then lots of back fire on the down rev. Oh crap!! I hope I didn't bust off a exhaust stud. Man i spoke to soon, after I had pulled off to the side of the road and looked at the bike. Sure enough the front upper exhaust stud snapped off like a pretzel stick.





I hate these little bastard studs when they snap flush. I can do 2 things.
1. try and get it out myself(Did it once before it was not fun!)
2. pay my friend at the bike shop $50 to get it out in 30 minutes with no tear down and still in the truck unloaded(he is that good)


I have been enjoying this bike so much lately and now this crap, I can't wait until i get the works shock in a couple days. Then i am going to install my new fork spring kit at the same time!

I hate Utah roads!
Top of pagePrevious messageNext messageBottom of page Link to this message

5liter
Posted on Tuesday, August 11, 2009 - 10:24 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I'd pay the $50 and be done with it.
Top of pagePrevious messageNext messageBottom of page Link to this message

Oldog
Posted on Tuesday, August 11, 2009 - 11:05 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Russ I would change all studs in this instance, Me 2 I would spend the 50$

I hear you on the issue, I have gone through 400$ in the last 7 days,

Character is expensive #$^%#%^#% !
Top of pagePrevious messageNext messageBottom of page Link to this message

Kalali
Posted on Tuesday, August 11, 2009 - 12:11 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Glad you didn't break something more difficult/expensive to repair/replace.
BTW, I have a chrome looking bracket thingy holding the header to the head. The bolts go through this bracket and the nut goes on the outside of it. How come yours looks different? Just wondering.
Also, did you look at the front ISO to see if it took any hits?
I would also pay the $50...
Top of pagePrevious messageNext messageBottom of page Link to this message

Blks1l
Posted on Tuesday, August 11, 2009 - 12:26 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Kalai, he probably slid the retainer down the header so you can clearly see the broken stud.
Top of pagePrevious messageNext messageBottom of page Link to this message

Brinnutz
Posted on Tuesday, August 11, 2009 - 12:46 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Are you still riding on that blown shock?

If so, I would stop until you get the works, unless you want this or worse to happen next time...

Just sayin' bro....
Top of pagePrevious messageNext messageBottom of page Link to this message

Reepicheep
Posted on Tuesday, August 11, 2009 - 12:53 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

The $50 bucks and 30 minute option would have me not only paying that, but throwing in a case of beer on top of it.
Top of pagePrevious messageNext messageBottom of page Link to this message

Preybird1
Posted on Tuesday, August 11, 2009 - 01:00 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Hey wilson i am still using the blown shock. The front forks are starting to leak and feel spongy also. I have the new fork spring kit and new guide bushings seals wipers and oil. The works is gonna be here friday! I will have the bike fixed today or tomorrow and get the suspension done by the end of the week! Dam! brand new studs too less than 60 miles on them.
Top of pagePrevious messageNext messageBottom of page Link to this message

Natexlh1000
Posted on Tuesday, August 11, 2009 - 01:30 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Perhaps weld a nut to it?
It might not be "in there" in there, you know?

The key is to not make it worse : )
EZ-outs are the devil.
Top of pagePrevious messageNext messageBottom of page Link to this message

Preybird1
Posted on Tuesday, August 11, 2009 - 03:30 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

The wheels are in motion, I had my driver and my mechanic go get the bike from my apartment. It will be fixed tonight I still won't ride it until i have the shock installed and the forks re-built.
Top of pagePrevious messageNext messageBottom of page Link to this message

Preybird1
Posted on Tuesday, August 11, 2009 - 11:43 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

HHmmmm Some thing is going on here, The "y" hanger bracket "little rubber iso" the one in the bracket is sticking out on the left side almost 1" It was not like that before this pot hole. I hope i didn't break that to. I didn't have time to mess with it so i left it at my buddies shop for the night....I needed some more parts from my apt. But i noticed that when i got the bike back it had a much bigger (diameter) washer on the outside of the hangar than i had remembered it having. Isn't the washer supposed be small enough to actually squeeze the rubber isos in the clamp? I wonder if this is the problem that started this failure. I have hit potholes before and never had this happen.
Top of pagePrevious messageNext messageBottom of page Link to this message

Jramsey
Posted on Wednesday, August 12, 2009 - 12:04 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

If the pot hole was large/deep enough to cause an exhaust stud failure whats the front tire/rim look like?
Top of pagePrevious messageNext messageBottom of page Link to this message

Preybird1
Posted on Wednesday, August 12, 2009 - 12:07 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I looked at the wheel it looks ok. I think because the front forks are so soft and in need of a rebuild that they took most of the blow, But the tire is brand new and has lots of tread so i think it helped a little as well!

(Message edited by preybird1 on August 12, 2009)
Top of pagePrevious messageNext messageBottom of page Link to this message

Oldog
Posted on Wednesday, August 12, 2009 - 09:10 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I would be giving that front iso a good close look...

my exhaust mounts tend to wander in the bracket not 1"

the front wheel will be off for fork service check the bearings

(Message edited by oldog on August 12, 2009)
Top of pagePrevious messageNext messageBottom of page Link to this message

Preybird1
Posted on Friday, August 14, 2009 - 02:04 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Sweet!!! The bike is fixed. It took him 2 hrs and he bumped me in front of...( I saw how many bikes he had lined up!) "He said i have enough bike's here that if i closed doors Today, I would still have work for 6 weeks after! He did full reassembly After exhaust stud repair for $70 So i gave him a $20.00 tip and a bottle of bourbon. But i give him tires and service at cost! It is a good relationship. I also got my new works shock! And i talked to an American sport bike association Sponsor. About having the front forks re-built and the whole bike's suspension tuned for $285. Man what a good deal this turned out to be! The works shock is just sweet, I showed it to some girlfriends of my GF and they said wow what is that. I tried to explain what it was. But to no avail. I also went and got a new wheel bearing set for both wheels.
Top of pagePrevious messageNext messageBottom of page Link to this message

Littlebuggles
Posted on Friday, August 14, 2009 - 02:29 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Dude, not only is she a strong runner but now with tuned suspension, that bike is gonna rock.

Sounds like a killer deal on getting those studs out, glad that went well, we have had so many "broke off a ez out in my broken studs" threads on here! Be careful with that next set.

So very jealous right now, haven't rebuilt my shocks yet and they're getting soft. Local Race Tech guy in Sandy doing your forks?

(Message edited by littlebuggles on August 14, 2009)
Top of pagePrevious messageNext messageBottom of page Link to this message

Texastechx1
Posted on Friday, August 14, 2009 - 02:27 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

the EXACT thing happend to me... and ied to get it out myself... not fun.

i would pay $100 to get it out! LOL
Top of pagePrevious messageNext messageBottom of page Link to this message

Preybird1
Posted on Friday, August 14, 2009 - 11:47 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Mike, It is a sponsor off that website you told me about. Utah sport bike association. The sponsor is "Corporate suspension" 867 E. Apple Park Way (3035 So.) He does a lot track side tuning so getting the bike in can be tricky! Usually after 6 p.m. Here is a link to the guy http://www.corporatesuspension.com/index.php I am going to install my works tomorrow. I am kinda hoping for some bad weather so i don't mind not being able to ride it!
Top of pagePrevious messageNext messageBottom of page Link to this message

Preybird1
Posted on Saturday, August 15, 2009 - 12:07 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

here is the new shock for you to drool over mike



I love the black spring!






Wait here are the new fork springs kit!


Top of pagePrevious messageNext messageBottom of page Link to this message

Littlebuggles
Posted on Saturday, August 15, 2009 - 01:09 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Corporate, yeah! I tried all night to remember his name and never could. That guy's name is Jason - I think he's a radiologist for a full time gig, he tuned my Sgt's suspension when he was racing last year and apparently he does really good work.

Enjoy!
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration