Author |
Message |
Cyclonemduece
| Posted on Thursday, June 19, 2008 - 07:28 pm: |
|
Hey guys with a d&d system. I am trying to put mine on and the question that i have is. On the pipes that come off of the cylinders on the end that goes into the merge collector, there is a tiny little "nub" on each pipe is that to stop the collector from going to far or do they go into the collector? Also the muffler seams like it wont go on, should i sad a little paint away, i think that will make em fit. |
Impala
| Posted on Thursday, June 19, 2008 - 09:11 pm: |
|
The muffler fit is TIGHT with the paint. I had to use a rubber mallet to get mine to slide onto the elbow on my slip on. |
Dtmcnamara
| Posted on Thursday, June 19, 2008 - 10:34 pm: |
|
rubber mallet +1 it did the trick for me especially after the ceramic coating |
5liter
| Posted on Thursday, June 19, 2008 - 10:51 pm: |
|
Be patient and work it in. I used some copper antisieze on mine and it slid together. |
Chasespeed
| Posted on Thursday, June 19, 2008 - 11:55 pm: |
|
Yep, its tight.... A little persausion with a mallet should do the trick... Worth the effort and patience though... Chase |
Cyclonemduece
| Posted on Friday, June 20, 2008 - 08:10 pm: |
|
and the little nubs that i described above? |
Chasespeed
| Posted on Friday, June 20, 2008 - 08:29 pm: |
|
Those are stops for the head pipe to the collector... Chase |
Eboos
| Posted on Friday, June 20, 2008 - 08:46 pm: |
|
Wow, it seemed like a long time ago that I did mine. It was very tight. |
Torquemonster
| Posted on Saturday, June 21, 2008 - 10:52 am: |
|
ditto. mine was so tight, I thought that something was seriously wrong. i used alot of elbow grease and quite a few curse words, but eventually, it fit. Hope youre pleased with the results. -I miss my D&D pipe everytime I fire her up. |
Blackm2
| Posted on Sunday, June 22, 2008 - 04:30 pm: |
|
Definitely tight, use the rubber mallet. Do NOT want to push those nubs into the collector, those are stops. Be sure you are using sceaming eagle gaskets too! Have to use them on the D&D pipes. |
|