G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   K12pilot Posted on Sunday, August 25, 2013 - 01:19 pm:        Can it b replaced ? Seems to have a crack. Leaking fuel ;(   Sparky Posted on Sunday, August 25, 2013 - 01:47 pm:        There are brass replacements available.   K12pilot Posted on Monday, August 26, 2013 - 05:42 pm:        Found em Thanks   Classicbuells Posted on Tuesday, August 27, 2013 - 10:19 am:        I have the same problem with a crack in the plastic fuel elbow. I have a new brass elbow, but, how do you fit the brass elbow to the ally carb body? I can't for the life of me see how it works.   K12pilot Posted on Tuesday, August 27, 2013 - 12:46 pm:        I just did 2 of them, one on the bench & one on the bike. Pretty easy actually, I did the one on the bench first to see how it would go…. Break off the plastic elbow Insert easy out nice & snug (use a size larger than you think you need) you don't want it to go into the carb body it will defeat the purpose, you just want to get a good bite on it. A LITTLE heat than twist & pull it out. Install…. A LITTLE heat on the carb body.. Freeze spray on the brass.. or throw it in the freezer while your taking the other one out. Align it & tap in with small hammer. Go riding.   Classicbuells Posted on Wednesday, August 28, 2013 - 06:58 am:        Thanks, sounds easy enough!

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: