Author |
Message |
Blake
| Posted on Friday, January 25, 2008 - 10:34 am: |
|
Thanks to Gary Louks for posting the following from an official Buell service bulletin.
SPARK PLUG CLEANING PROCEDURE 2008 XB and 1125R Buell motorcycles provide a feature to help clear residual fuel from the combustion chamber if a flooded engine or fouled spark plugs are suspected. This is achieved by opening the throttle to wide open, setting the Run/Stop switch to Run, then turning the ignition switch ON. This will fire the spark plugs for approximately 4 seconds, burning any fuel left over in the combustion chamber. It may be necessary to repeat this procedure several times to allow a severely flooded engine to start. NOTE: Motorcycle should be in Neutral. |
Shimpeno
| Posted on Friday, December 26, 2008 - 06:18 pm: |
|
Did this today on my 2008 XB9SX that was idling rough, it worked well. Just a note, but the engine light blinks a new times while it does its thing, when it stops blinking, the process is complete. |
Jetjock
| Posted on Thursday, January 15, 2009 - 03:52 pm: |
|
Is there any similar procedure for 2007 Ulys? |
Id073897
| Posted on Thursday, January 15, 2009 - 04:29 pm: |
|
Yes, you could initiate a spark plug test which also fires the spark plugs several times. You have to do it for the rear and front cylinder separately. The automatic spark plug cleaning is by far more sophisticated, but nevertheless, the test is better than nothing. If the engine is flooded, you could give it a try to start with full throttle (really full throttle), as starting fuel is set to 0 at that throttle position. |
Jetjock
| Posted on Friday, January 16, 2009 - 12:32 am: |
|
I don't know about anyone else; but, I haven't found this to work on my Uly - at least not well enough to clear, start & run. Maybe I'm not holding my mouth right? |
|