G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Viper9885 Posted on Tuesday, June 03, 2008 - 03:14 pm:        I have an 04 12R with a Drummer Exhaust (Which was installed by the owner before me) and my Exhaust valve actuator is still under the airbox cover, i didn't follow the cable to see whats up or look into it any further, but can i remove all that stuff, i want to do the Open filter element mod, but i have a black box with a cable running to it and no where to put it if i do   Boney95 Posted on Saturday, June 07, 2008 - 04:22 am:        Pull the cable out through the bike. This cable runs from the servo to the muffler. I don't know why the previous owner did not remove this cable completely. If you are going to buy an open air box kit you will need a servo emulator http://www.americansportbike.com/shoponline/ccp0-p rodshow/9313.html when you remove the servo so the ECM still believes there is a servo still attached. Have at her!   Viper9885 Posted on Tuesday, June 10, 2008 - 10:30 am:        thanks very much the emulator is on the way

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: