G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Ironken Posted on Friday, October 19, 2007 - 03:09 pm:        I removed the airbox, spk plugs and the exhaust servo on my '05 XB12S to adj my primary chain, buttoned it all back up, fired it up and after about 5-10 sec. of idling the check engine light comes on????? I removed the tank cover and verified that the servo is functioning, plug wires are tight........ Any ideas? (stock ecm and air filter, drummer, snorkel removed. Only change this go round was snorkel removal. 1600 miles on bike)Thanks Kenny   Diablobrian Posted on Friday, October 19, 2007 - 04:58 pm:        Are you sure you plugged the air temp sensor back in? That would do it.   Al_lighton Posted on Saturday, October 20, 2007 - 12:00 pm:        Short pins 1&2 on the diagnostic connector (under seat, back by tail light, right side, grey connector with black rubber plug), put the bike in run mode (key and kill switch on, in neutral), and count the blinks. 6 fast flashes 2 second pause 1 flash per second for first number 2 second pause 1 flash per second for the second number 2 second pause repeat. Tell us the number that is flashed out and we'll tell you what isn't working. (Message edited by al_lighton on October 20, 2007)   Ironken Posted on Saturday, October 20, 2007 - 11:13 pm:        Thanks guys, I just got in. Will give it a whirl tomorrow......Kenny   Al_lighton Posted on Sunday, October 21, 2007 - 12:00 pm:        It probably wasn't clear from what I wrote. Short the pins with the bike off, THEN turn the key on while the pins are short, to put it in diagnostic mode.   Ironken Posted on Sunday, October 21, 2007 - 12:58 pm:        Al, what will flash? Engine light? Gotta forgive me, kinda new to the diagnostic gig. Thanks for the help....Kenny   Ironken Posted on Sunday, October 21, 2007 - 02:50 pm:        Guys, thank you for all of the help. I just pulled my head outta my ass and looked in the svce. manual and found everything that you were talking about, Al. I didn't know that there was a diag. mode that didn't use the scan tool to display codes......go figure. Thanks again....Kenny

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: