G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » XBoard » Archive through November 05, 2012 » Right side heat « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

B00stzx3
Posted on Monday, August 20, 2012 - 10:51 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

So I still have a problem with my XB9R and the right side frame getting hotter than hell. I've wrapped the headers, sprayed them with the silicone header wrap spray, and added the small OEM scoop. Doesn't get as hot as quickly but gets too hot nonetheless. I also have Sharkskinz full fairing which I won't get rid of.

So gonna try a couple of things, hopefully this might help some other folks. Going to get some Thermotec heat shield from American Sport Bike and line the inside of the right frame with it. Gonna get the bigger right side scoop, and maybe find some DIY ducting to pipe air from outside the fairing straight in. Also might try cutting some rubber or diamondplate sections out to protect my knee/leg from the heat. That would be cheaper than the other two options so gonna try this first!
Top of pagePrevious messageNext messageBottom of page Link to this message

Teeps
Posted on Monday, August 20, 2012 - 12:03 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Yep, they do that...

The only time I notice the "right side heat", is when riding in a left to right cross wind.
Top of pagePrevious messageNext messageBottom of page Link to this message

Ourdee
Posted on Monday, August 20, 2012 - 03:42 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Thick pants, leather.
Top of pagePrevious messageNext messageBottom of page Link to this message

B00stzx3
Posted on Monday, August 20, 2012 - 05:04 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I get it after 30 minutes or so.

I usually ride full leathers, but sometimes I like to squid it around town or cruise with a girly riding 2-up.
Top of pagePrevious messageNext messageBottom of page Link to this message

Froggy
Posted on Monday, August 20, 2012 - 05:21 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

What about your ECM? Getting the correct tune will help it run cooler overall. Your profile says you flashed the ECM, I assume you mean you copied the P&A Race ECM maps to your stocker.
Top of pagePrevious messageNext messageBottom of page Link to this message

Chessm
Posted on Tuesday, August 21, 2012 - 02:09 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

heat on the right side. try riding an1125 around. the right side is scalding even at freeway speeds in leathers.
Top of pagePrevious messageNext messageBottom of page Link to this message

B00stzx3
Posted on Tuesday, August 21, 2012 - 02:04 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

At Froggy - I bought the cable and fellow Buell rider gave me some maps and ECMSpy which I loaded up. Didn't even think about that, I backed up the stock file/configuration thing before I did it. Might run cooler if I go back to stock?

I'm running open airbox and magnaflow exhaust.
Top of pagePrevious messageNext messageBottom of page Link to this message

Hughlysses
Posted on Tuesday, August 21, 2012 - 06:44 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Line the inside of the frame with Thermotec heat barrier:

http://www.americansportbike.com/shoponline/ccp0-p rodshow/16130.html

The best way is to rotate the engine down to get access, but you can probably squeeze enough in there to help by working carefully from below.
Top of pagePrevious messageNext messageBottom of page Link to this message

B00stzx3
Posted on Thursday, August 23, 2012 - 02:07 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Figured the 1125 was cooler since it was liquid cooled...whoa.

Thanks Hugh I will try some of that.
Top of pagePrevious messageNext messageBottom of page Link to this message

Juniorkirk
Posted on Friday, August 24, 2012 - 01:52 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

even though the 1125 is liquid cooled, the headers are not and you get every ounce of heat from them.
Top of pagePrevious messageNext messageBottom of page Link to this message

B00stzx3
Posted on Monday, August 27, 2012 - 11:45 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

That's crazy. Thought liquid cooled stuff runs cooler always.

I'm gonna try the Thermotec and they make TechSpec that covers the frame too.
Top of pagePrevious messageNext messageBottom of page Link to this message

Argentcorvid
Posted on Monday, August 27, 2012 - 12:19 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

The tech spec stuff doesn't help that much.
Top of pagePrevious messageNext messageBottom of page Link to this message

Midknyte
Posted on Tuesday, August 28, 2012 - 11:38 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Does the bike have a K&N performance air filter?

If so, and the ECM is stock, you're running extra lean. Go back to a paper filter and it will help.
Top of pagePrevious messageNext messageBottom of page Link to this message

B00stzx3
Posted on Tuesday, September 11, 2012 - 04:48 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Yes it does!!

K&N, open airbox and magnaflow custom exhaust. Guess it is running lean!!

I will load up the race map and see what that does.
Top of pagePrevious messageNext messageBottom of page Link to this message

Starwolve
Posted on Wednesday, September 12, 2012 - 09:28 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I did the liner with the heat barrier from American Sport Bike. I would recommend getting the plastic "push-in" fasteners so that you can remove the wiring harness and cover the left hand side of the frame as well. Those little fasteners almost always break off, but I found replacements at NAPA. Just take your time and make some templates out of cardboard or old folders, and make sure you have it oriented correctly before you start cutting (I ended up with one "mirror image" heat shield - not enough coffee that morning I guess!)



It makes sense that you need to address the tuning and can do that without rotating the engine, but every little trick can help.
Top of pagePrevious messageNext messageBottom of page Link to this message

Teeps
Posted on Wednesday, September 12, 2012 - 12:41 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Anyone ever done before and after temperature measurements?
Top of pagePrevious messageNext messageBottom of page Link to this message

Foximus
Posted on Saturday, September 15, 2012 - 03:34 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

lmao... you guys are sissies. Go ride a tuber with aftermarket pipes, then complain about your heat.
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration