| Author | Message | ||
     Greg_e |
Here is one question that I haven't seen explained and I'm not sure how to deal with it... In the Tuning guide v2 it says to ride the bike to get a stable AFV, then multiply the fuel values by this value and reset AFV to 100%, you can then start the logging. What I haven't figured out how to do is multiply the fuel values by this AFV value to get started. The old guide just said to reset AFV and start logging, obviously the normal AFV would be taken into account during that initial logging. Do I save the maps and let MegaLog viewer do this multiply for me or is there another way to get this initial starting condition set. | ||
| Greg_e |
Maybe I spoke too soon: http://www.badweatherbikers.com/buell/messages/327 77/450318.html?1239368445 Part way down Sifo explains: "ECMspy has a function to add a percent across the entire map. Below the maps there is a * button with a 1.0 just to the left. Plug in 1.1 highlight the entire map and click on the * button. It will multiply the entire map by 1.1. Check the Simultaneous check box and it will do both maps at once. Please carefully double check what I've said. I haven't played with this all winter. " I think this is what I need, is this correct? Then once it is multiplied I save the maps back to the ECM and start my logging run, again is this correct? (Message edited by Greg_E on March 18, 2012) |
