G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » XBoard » Archive through March 28, 2010 » Help with race ECM and TPS reset « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Illbuell
Posted on Thursday, March 25, 2010 - 05:49 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Put a used race ECM in my 2004 XB12S. Started it up to load it and it ran great. Got it to the dealer to reset the TPS as advised.
After the reset the bike varies its RPM up and down about 1000RPMs in range. If you open the throttle to say 4K it will go 4K to 3K and back to 4K constantly.. Any ideas? I wish I hadn't touched it but don't know how to go back..
Top of pagePrevious messageNext messageBottom of page Link to this message

Terrys1980
Posted on Thursday, March 25, 2010 - 06:32 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I have had that happen after doing a TPS reset. Just turn the idle screw CCW to your desired idle RPM, which should be around 1050-1150. I think its from not holding the throttle fully closed while doing the reset.

(Message edited by terrys1980 on March 25, 2010)
Top of pagePrevious messageNext messageBottom of page Link to this message

Illbuell
Posted on Thursday, March 25, 2010 - 07:05 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

That doesn't help.. Its up and down with the rpms. Doesn't hold a smooth rpm at all. going to do the TPS reset again tomorrow. I took the air box off so I know the throttle is completely closed.
Top of pagePrevious messageNext messageBottom of page Link to this message

Blake
Posted on Thursday, March 25, 2010 - 07:33 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Sounds like a faulty reset. Got ECMSpy?
Top of pagePrevious messageNext messageBottom of page Link to this message

Illbuell
Posted on Thursday, March 25, 2010 - 07:56 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Whats that?
Top of pagePrevious messageNext messageBottom of page Link to this message

Terrys1980
Posted on Friday, March 26, 2010 - 05:58 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Do a little research on ECMSpy, download the tuning guide. The guide has step by step instructions for the TPS reset. PM me and I'll help you find the software if you feel you can do the reset.
Top of pagePrevious messageNext messageBottom of page Link to this message

Illbuell
Posted on Friday, March 26, 2010 - 10:23 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I just use the computer at the dealership..
But thanks anyway.: )
Top of pagePrevious messageNext messageBottom of page Link to this message

Chainsaw
Posted on Friday, March 26, 2010 - 04:22 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Sounds like a faulty reset. ...

I agree. Had the same symptoms a couple of weeks ago on mine, 'cause I didn't have the throttle closed all the way. New reset fixed 'er up.

I bought the Technoresearch software from a board sponsor back in 2004 that allows me to Rezero the TPS Sensor.

(Message edited by chainsaw on March 26, 2010)
Top of pagePrevious messageNext messageBottom of page Link to this message

Kenney83
Posted on Friday, March 26, 2010 - 10:30 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

can you still get a copy of ECMSpy? They did shut down. If any one has a good link to down load it could you post it up please. Thanks
Kenney
Top of pagePrevious messageNext messageBottom of page Link to this message

Blake
Posted on Wednesday, May 12, 2010 - 01:10 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

For the search engines:

For 2008 and later Buell twins TPS reset is built-in and very simple.

Buell TPS Reset/Rezero Procedure for 2008 & later Buell XBikes and 1125R/CR motorcycles:

The Buell TPS reset for 2008, 2009, or 2010 Buell twins is simple but requires that you precisely perform the following procedure, step-by-step, exactly as described:

0. Begin with the the ignition off, key out, and the run/stop switch in the "stop/off" position.

1. Switch the Run/Stop switch to the "Run" position.

2. Insert ingition key and turn it to the "on" position. Do not start or turn over the engine.

3. Rotate the throttle grip from the closed throttle position to the wide open throttle position hold for one second then rotate back to closed position and hold for one second. Repeat that exact throttle action two more times (three total open/hold-closed/hold cycles) holding the throttle grip gently against each stop for one full second.

4. Cycle the key off and back on.

You've just completed a TPS reset for your 2008 or later Buell motorcycle. Start your bike and ride.
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration