G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » XBoard » Buell XBoard Archives » Can i get rid of servo motor? « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Chad
Posted on Thursday, May 04, 2006 - 09:42 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Putting a Jardine muffler on and taking the cable off the the servo motor ontop of tank. Can i get rid of the motor all together?
Top of pagePrevious messageNext messageBottom of page Link to this message

Humblebueller
Posted on Thursday, May 04, 2006 - 09:50 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Yes, mine was removed when the race kit was put it, which included the ECM.
Top of pagePrevious messageNext messageBottom of page Link to this message

Diablobrian
Posted on Thursday, May 04, 2006 - 10:23 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

There is also an servo emulator available for those that keep the stock ecm.
I think Al at American Sport Bike has them
Top of pagePrevious messageNext messageBottom of page Link to this message

Buellfirebolt31
Posted on Thursday, May 04, 2006 - 10:56 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Somebody with a XB12S put a Jardine on his. He said that if you take the wire off completely you get a engine light on. He said take the wire that runs to the motor and just tuck it up under the airbox?? What is this guy talking about???? Thanks, Bradley
Top of pagePrevious messageNext messageBottom of page Link to this message

Diablobrian
Posted on Thursday, May 04, 2006 - 11:18 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

If you remove the servo motor and do not put on an emulator or race ecm you will get an error code.

If you remove the cable from the muffler and stick it up under the airbox cover it will still move and prevent codes,
it just won't actuate anything. Kind of the same function as the emulator, but be careful where you stick it.
It can damage other component if it grabs hold of them.
Top of pagePrevious messageNext messageBottom of page Link to this message

Opto
Posted on Friday, May 05, 2006 - 05:44 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

If you are into DIY this circuit has been working fine for me for at least 18 months.


muffler actuator CEL keeper offerer
Top of pagePrevious messageNext messageBottom of page Link to this message

Buell1111
Posted on Friday, May 05, 2006 - 09:12 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

"There is also an servo emulator available for those that keep the stock ecm.
I think Al at American Sport Bike has them"

BEWARE! If you're running a free flow exhaust and NOT using the race ECM (Especially if you're also running a free flow air filter &/0r intake!) you're flirting with a dangerously lean running condition!

(Message edited by Buell1111 on May 05, 2006)
Top of pagePrevious messageNext messageBottom of page Link to this message

Opto
Posted on Sunday, May 07, 2006 - 05:53 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I ran an 04 XB12S with K&N filter, stock ecm and Original Drummer and monitored the AFR with a wideband O2 sensor (TechEdge 2CO) and did not find any dangerously lean running conditions. For other mufflers/systems it may be different.

Edit: Maybe because the Drummer makes good power down low in closed loop then the stock ecm is better able to compensate by upping the AFV from the O2 feedback during closed loop, whereas a muffler that makes mostly top-end power may lead to lean conditions at high rpm, because the stock ecm doesn't have to add more fuel at lower rpm since no extra power is being made there.

(Message edited by opto on May 07, 2006)
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration