| Author | Message | ||
     Kurosawa |
I went to order a chaincase gasket (and others) online and got a notice they were only sold through local dealers, and one of them was over $20. So I was in Walmart and bought a tube of 650-degree silicone gasket in a tube. Before I use it, I want to ask how well this has worked out for others here. | ||
| Interex2050 |
I have not tried the 650 degree one, but I used to swear by the PERMATEX ULTRA COPPER ® Hi - Temp RTV Silicone Gasket Maker. http://www.accessconnect.com/gasket_maker_.htm That stuff is incredible, its great for almost anything that can require a seal/gasket. I have used it in anything from engine cases to sealing gaps between headers and H-boxes... not to mention it dries quickly. | ||
| Diablobrian |
I'd go with type 2 non-hardening permatex on your old gasket if you don't want to pop for a new one. Old trick we used in the navy when we were out at sea. | ||
| Kurosawa |
Thanks for the advice! I'll head over to my local Carquest tomorrow morning and see what they have. | ||
| Rocketman |
This is the best gasket maker in the world.  GASKET MAKER Wynn’s Silicone Gasket Maker is a low volatility, high temperature silicone adhesive sealant. It is especially designed for vehicles with oxygen sensors and catalytic converters. It forms an instant leak-proof gasket on all engines, it seals windscreens, light housings, rubber hose connections and insulates wiring. Properties • Self curing, silicone based adhesive gasket. • Forms gaskets for sealing metal components. • Non-conductive insulator. • Bonds to wood, glass, metal, ceramic, plastic, rubber, concrete. • Chemically resistant to oil, transmission fluid, anti-freeze, diesel fuel, lubricants, water and steam. • Shelf life exceeds one year. Applications • All metallic assemblies (eg. oil sump, water pump, hose outlets, valve cover, timing gear cover, thermostat housing etc.) • Wiring looms. • Suitable for sealing windscreens, light housings and rubber hose connections. • Sealing leaks. Directions Clean surfaces thoroughly. Remove cap and unscrew aerosol valve; depress side arm to regulate product flow. (For temporary surfaces, apply a light coat of oil to uncoated surfaces, then assemble.) Clean excess with a knife or nonflammable cleaning fluid. Sealant is fully cured in 10-12 hours. Curing – cure progresses inward from the surface. At conditions of 25oC and 50% relative humidity, a tack-free skin forms within 20 minutes. Cure time is affected by relative humidity, degree of confinement and cross-sectional thickness of the sealant. Moisture reduces cure time. Rocket | ||
| Interex2050 |
Classy stuff, I will have to try it out one of these days... Thanks Rocketman | ||
| Diablobrian |
I've seen other brands, but I've never seen Wynn's. If it's that good, I'll have to give it a try. | ||
| Jackbequick |
Kurt, Try any H-D dealer and ask for the new metal gasket for the Sportsters. That gasket is same one Buell uses, is much easier to mount than the old paper ones, and can be reused several times or more. I'm not sure about the price on them but I think I got one for only a few Bucks or so. Jack | ||
| 1stbuell |
I was just about to post a similar question when I happened on this. What a great site! In my 3 months of being a Badwebber, I have either been able to find the answer or have had every question answered. This is the Wells Fargo of motorcycle intelligence. | ||
| Interex2050 |
Few bucks for a gasket? Wow... I remember back in the day of my CX a set of gaskets set me back $150 or so... Thats why I used to swear by that stuff... | ||
| Rocketman |
I've used the Wynns for a few years now. They've recently uprated the nozzle and it works great. I use it quite often, as you can imagine, and it does seem to last, even in trade use, for ages. I emptied a tube a couple of weeks ago. Been intrigued by the method it comes out of the tube, I cut the empty open. I was amazed to find the empty was bone dry, not a drop left inside anywhere. About £10 in the UK. Rocket | ||
| Dano_12s |
Yamabond4 works great from yamaha.Sounds the same as Wynns.Don't know where Wynnns is aval. in U.S. |
