G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » XBoard » Buell XBoard Archives » Archive through June 21, 2005 » Anyone run this NGK plug? DPR8EIX-9 « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Elyaswolffxb9s
Posted on Thursday, June 16, 2005 - 08:13 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Ok, so my XB9 takes a DCPR8E and I want to run a better plug (not the pro series 'split fires'). The closest plug NGK makes is a DPR8EIX-9 which is a iridium plug.
The way I understand it is that the "c" means it uses a different size plug wrench, and the -9 means that the gap is 9mm (.036) instead of the 10mm (.040) gap that the regular plug takes.

So is this plug safe to use, seeing how it is the same heat range and a resistor type as stock? But higher quality than stock (and iridium)
Top of pagePrevious messageNext messageBottom of page Link to this message

Spatten1
Posted on Thursday, June 16, 2005 - 09:07 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I'm running them, but I gapped a tight .040, because I didn't know any better. The are running fine, but I didn't expect any extra performance.

No fouling problems yet, which is why I switched, of course when it drops to 30 degrees I'll know if it fixed the problem.
Top of pagePrevious messageNext messageBottom of page Link to this message

Johnk3
Posted on Thursday, June 16, 2005 - 09:53 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

i bolted them in and they work fine. i figured i'd have fouled them considering how rich i was running.
Top of pagePrevious messageNext messageBottom of page Link to this message

Fullpower
Posted on Friday, June 17, 2005 - 12:58 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

are you interchanging the concept of "quality" with the more easily measured parameter of purchase price?
Top of pagePrevious messageNext messageBottom of page Link to this message

Trojan
Posted on Friday, June 17, 2005 - 01:33 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

You really need to be running the DPR9EIX-9 and not the DPR8. You'll find that this is a better match for the 10R12 heat range and will not foul.
Top of pagePrevious messageNext messageBottom of page Link to this message

M1combat
Posted on Friday, June 17, 2005 - 01:39 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Do a search for "Master" for the last couple months and you'll find a Master Cross Reference list for plugs that I posted a while back... a 282 page plug cross reference spreadsheet : ).

The DCPR9 and IXU24 are what I'd recommend...
Top of pagePrevious messageNext messageBottom of page Link to this message

Elyaswolffxb9s
Posted on Friday, June 17, 2005 - 02:15 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Great, thanks guys.
So what do you gap them at? Or is it true that you cannot re-gap fine wire iridium plugs?
Top of pagePrevious messageNext messageBottom of page Link to this message

M1combat
Posted on Friday, June 17, 2005 - 02:32 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I re-gapped my IXU24's to 40... I think it probably depends on how you stretch the gap.
Top of pagePrevious messageNext messageBottom of page Link to this message

Gowindward
Posted on Friday, June 17, 2005 - 03:22 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I have gapped the NGK's but the inner electrode does seem to be a bit fragile. I have broken the tip of the electrode off a couple of times. I figure the plug is trash after that. I have gapped them at .035"
Top of pagePrevious messageNext messageBottom of page Link to this message

Fullpower
Posted on Friday, June 17, 2005 - 06:08 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

M1 are the IXU24 a 5/8 hex size?
Top of pagePrevious messageNext messageBottom of page Link to this message

Xbolt12
Posted on Saturday, June 18, 2005 - 02:52 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

"I have gapped the NGK's but the inner electrode does seem to be a bit fragile. I have broken the tip of the electrode off a couple of times. I figure the plug is trash after that. I have gapped them at .035"

DCPR9EIX in the US. NGK warns you about using a spiral type gapper, as it will damage or break the electrode tip which is very fine. You are supposed to use the type of gapper that has a cut which hooks around the ground electrode at the bend and does not contact the center electrode at all. BTW my plugs did not come with the correct gap and I had to set them (I think recomended is .040). NAPA has the gapper, as do many auto parts stores (it is the old school kind of gapping tool).
Top of pagePrevious messageNext messageBottom of page Link to this message

Xbolt12
Posted on Saturday, June 18, 2005 - 02:54 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I forgot to add the gapping tool has wire feeler gauges on the opposite end for measuring the gap, and you must be VERY careful when measuring not to force the wire through at all or you will damage the center electrode (tip). Gently is the word.
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration