G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Tirebiter Posted on Friday, March 14, 2014 - 10:32 am:        Hey Buellers - Next week I will have shims to reduce the slop in the rocker arm end play for EVO rocker arms. Even though my bike has less than 10,000 miles the top end made more noise than it should. My S3 rocker arm shafts measured .5540" in diameter. When I measured the end play with the stock rockers my measurements were between .009" and .010". I measured some new Crane roller rockers and they measured the same. The shims I have coming are .005" and .007" thick. I am aiming at a minimum of .003" end-play. I will sell these for $3.00 @. Illinois residents will have to pay sales tax. Not sure about shipping charges but it will be minimum. Any EVO motor that uses a shaft diameter of .5540" can use these shims. If interested in these PM me and I will make a list. I will include some pics when I receive them next week. If there is a need for other sizes, I may order more. Later, Steve

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: