G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Chas1969 Posted on Wednesday, June 04, 2008 - 02:12 am:        Hello Any thoughts on my 06' Uly that has a mild 'pulse' or wobble/vibe when going into a corner with giving some gas. Right seems more than left cornering and giving the rear wheel power makes it happen. It is not noted with clutch pulled in. And I think it is coming from the rear wheel ... front is fine. Thanks for your opinions Chas   Uly1080 Posted on Wednesday, June 04, 2008 - 06:45 am:        Maybe check your tires. Irregular wear (squared off, or cupped) or the wrong pressure can cause wobble or vibration in corners. Just a thought.   Barker Posted on Wednesday, June 04, 2008 - 07:58 am:        I get wacky shimmy/shake under medium to hard braking in corners? ideas? stock bike.   Froggy Posted on Wednesday, June 04, 2008 - 08:02 am:        Sounds like a case of the Dunflops for both you guys. Throwing the Scorpion Syncs on is the best mod you can do to the bike.   Hughlysses Posted on Wednesday, June 04, 2008 - 08:39 am:        Chas- check your rear wheel bearings; it could be related. (Message edited by hughlysses on June 04, 2008)   Chas1969 Posted on Wednesday, June 04, 2008 - 11:20 am:        Hughlysses, me too The tires look worn, but uniform. The wheel weights are still there and no dents to the rim. Dunflops are flops with front wheel feeling fishy. The right rear bearing 2-3 wks ago had a goober of lube pushed past the seal. But with only 2.5K miles ... even 20K miles, I never seen this with a bearing. With everyones help most likely pull the rear wheel and change out the bearings. Also ordered Syn's will be coming soon) Thanks Chas   Barker Posted on Wednesday, June 04, 2008 - 06:21 pm:        thats what I assumed. Let me rip thru this set and then get me some PR2CT's   Etennuly Posted on Wednesday, June 04, 2008 - 06:24 pm:        Barker, You still have the stock brake pads? Have you re-torqued the steering head? These are likely to cause your problem.   Barker Posted on Wednesday, June 04, 2008 - 06:32 pm:        stock pads. i have a full set of ebc HH's ready to go on. i'll check steering head. thanx   Etennuly Posted on Wednesday, June 04, 2008 - 06:43 pm:        You got the procedures for the pads? Clean the pistons with a rag or something before you push them back in and wipe the rotor down with brake cleaner(careful, it eats powdercoat finishes). All of that stuff is in the knowledge vault, including break in procedures. The head bearing info is in the service manual.   Chas1969 Posted on Wednesday, June 04, 2008 - 06:54 pm:        fyi: It's not a front wobble/vibe.   Bigkuri Posted on Wednesday, June 04, 2008 - 07:03 pm:        Primary drive? Do you have a free spirits belt tensioner?

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: