| Author | Message | ||
     Steveford  |
Jagg part number J1390, horizontal oil cooler for the tube framed Buells. Used for a couple thousand miles, comes with adaptor and lines, does not include the thermostat which they sell seperately. List is 250.00, 125.00 plus freight. Perfect shape. Anyone have an alloy S1 oil tank they'd care to part with? Thanks Steve Ford Buell1000@netscape.net | ||
| Mbsween  |
Steve, do you know if the x1's. I thought the cooler had to be vertical because of the extra frame brace. Also do you have a picture? | ||
| Orion1  |
Steve, I sent a message to your e-mail address but Outlook wouldn't let me see the attachment that was with your response. What the heck does "Take two" mean? Was that from you or is there virus/hacking monkey business going on here??? Anyway, here's my question: I've not seen in person the horizontal-mount cooler that attaches to the heim joint before, I've just seen the photo on the Jagg site. Does it stick out far enough to hit ground if the bike goes over? Seems like it could bend the cooler or the joint if it does. I was sort of leaning to the vertical mount cooler cause if you go down when the bike is moving forward, the cooler can pivot back, especially if you install the cooler tilted back a little bit. But then again, maybe I'm jus igorant. The adapter is the part that goes under the filter, to let the oil go thru the filter before it goes thru the cooler? Thanks. | ||
| Orion1 |
Steve, The heck with it. It looks like it will be protected in a fall and won't hurt the heim joint. If the cooler DID hit the ground, looks like that attachment bar is thin enough to bend or break. Sell me that there cooly thing-a-ma-jig. I'll try to contact you by your e-mail again. | ||
| Steveford |
Sold to Orion1! I'll send you a private message - I wouldn't worry about the cooler getting damaged in a crash as it's tucked in pretty well. | ||
| Fly  |
Steveford, Check out ebay item 4522087645 for alloy oil tank. Don't know if it's what you are looking for, but hurry, 1 day left on auction. | ||
| Steveford |
Fly, Thanks for the heads up on the oil tank but that won't fit the S1. Maybe I need an S2??? Mbsween, This particular oil cooler was on the X1 at one time as well as the old S3. Sorry, no pics. | ||
| Orion1 |
Steve, I got the oil cooler, it's in great shape. I'll go ahead & order the manual "flow/no-flow" valve for it. Thanks again. | ||
| Steveford |
Good. Hope that it didn't puke out too much oil en route! |
