Author |
Message |
Orngm2
| Posted on Friday, May 02, 2014 - 02:34 pm: |
|
Can anybody tell how the values in the "other maps" tables affect how the bike runs...? Accelleration enrichment,full accel revs, and the correction table. I have a 1999 X1 with force pipe and force intake. bike has a real flat spot at around 2500 rpm when given a handful of throttle. |
Kalali
| Posted on Friday, May 02, 2014 - 06:26 pm: |
|
Changing each and every one of those parameters affects how the bike runs, usually for worse. Its best to leave them alone and use the factory settings unless you're tuning on a dyno. You're better off just fiddling with the fuel maps around 2500 rpm until you get dialed in. See if someone with your set up can send you their maps. (Message edited by kalali on May 02, 2014) |
Firemanjim
| Posted on Friday, May 02, 2014 - 07:07 pm: |
|
2500 RPM--- X-1 is never happy that low! And your Force pipe makes that worse. Post your fuel maps or send them to me and I will look at them. |
Blu1hockey
| Posted on Friday, May 02, 2014 - 09:06 pm: |
|
Yep mine isn't happy between 2500 to 3000. Neither is my baby maker. |
Orngm2
| Posted on Saturday, May 03, 2014 - 08:20 am: |
|
i have a kooks pipe and header... are they any better? |
|