Author |
Message |
Rotor
| Posted on Monday, June 11, 2012 - 12:07 pm: |
|
it's a 2010 model, with 3 bearings in the rear wheel.Searching also for front wheel but i think it's the same as XBs someone have the standard number for INA or SKF reference ? thank you RoToR |
1313
| Posted on Monday, June 11, 2012 - 12:47 pm: |
|
it's a 2010 model, with 3 bearings in the rear wheel. Are you certain of this? Is the rear axle black or silver? It's been said that the CR rear wheel was never produced in the 3 bearing configuration, even in the 2010 models. I'd really like to see one if they really do exist. Front wheel - other than coloring - is the same as XB's. Sorry I don't have any more helpful info, 1313 |
Nuts4mc
| Posted on Monday, June 11, 2012 - 01:15 pm: |
|
Front = 6005 ( deep groove, sealed) I purchased KoYo brand - seems to work AOK (applied technologies dot com had them in stock) Don't know about the rear ...I have a 3 bearing kit from EEEEBR, but no wheel - when I get home I can look for it...might be able to get you some numbers as a starting point BTW - the 2 Bearing Wheel takes a 6006 ( silver axle) (Message edited by nuts4mc on June 11, 2012) (Message edited by nuts4mc on June 11, 2012) |
Nuts4mc
| Posted on Tuesday, June 12, 2012 - 10:44 pm: |
|
Put the kit away a little too good ( sorry for the delay)..this is the bearings for the rear wheel with (3) bearings and a Black axle. On the seals(Black in color): NBR +F8 060-101 On the outer race: E0708 2331 FAG F-570778 with my old calipers ( not calibrated!) OD 62mm x ID 31mm x 16mm W most likely deep groove and sealed (both sides) hope this helps! |
Rotor
| Posted on Monday, June 18, 2012 - 07:28 pm: |
|
thanks guys |
|